DRV8313 simplefoc
Enderscheng·DRV8313_simplefoc_PCB·Hardware/elec3300.kicad_pcb
About the DRV8313 simplefoc PCB
DRV8313 simplefoc is an open source PCB design by Enderscheng, published on GitHub. It is a 4-layer board measuring 105 × 35 mm, with 63 components from 25 distinct parts.
Other key parts include the ACS712xLCTR-05B, DRV8313PWP and LMR36015SFBRNXR. By type, the board carries 30 capacitors, 10 ICs, 10 connectors, 7 resistors, 4 diodes and 1 fuse.
It belongs with the robotics & motion and test & measurement designs in this gallery.
From the project
A FOC driver board for multiple BLDC motors
- Project: FOC Motor Driver PCB - Driver IC: Texas Instruments DRV8313 - Firmware ecosystem: Arduino and SimpleFOC library
- Hardware/ – schematics, PCB layout, fabrication outputs (Gerbers) - BOM/ – BOM files, part numbers, assembly notes - Docs/ – wiring diagrams, photos, notes
1. DRV8313 – 3-phase driver IC 2. ASC712 – Hall-effect current sensor 3. LMR36015S – synchronous step-down buck converter 4. Connectors - Power input (VIN/GND) - Motor outputs (U/V/W) - Control header (PWM/EN/GND/FAULT, etc.) - current sense output
Main components on the DRV8313 simplefoc
DRV8313 simplefoc bill of materials (BOM)
63 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | ACS712xLCTR-05B | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U9, U10, U12, U13 |
| 3 | DRV8313PWP | PWP0028F_L | U3, U8, U11 |
| 1 | LMR36015SFBRNXR | VQFN-12_L3.0-W2.0-P0.65-BL_TI_RNX | U4 |
| 3 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1, J10, J13 |
| 1 | XT60-M | AMASS_XT60-M | J2 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3, J9, J12 |
| 3 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J4, J8, J11 |
| 1 | 01000057Z | FUSE_01000057Z | F1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 3 | LED | D_0603_1608Metric | D2, D3, D4 |
| 1 | 10u | L_0805_2012Metric | L2 |
| 6 | 1n | C_0402_1005Metric | C1, C2, C29, C30, C37, C38 |
| 3 | 100uF | CP_Radial_D5.0mm_P2.50mm | C3, C28, C36 |
| 3 | 220n | C_0402_1005Metric | C8, C19, C31 |
| 1 | 2.2u | C_0805_2012Metric | C9 |
| 2 | 22n | C_0402_1005Metric | C10, C11 |
| 10 | 100n | C_0402_1005Metric | C12, C20, C21, C22, C24, C26, C27, C32 +2 |
| 1 | 22u | C_0805_2012Metric | C14 |
| 1 | 1u | C_0402_1005Metric | C15 |
| 3 | 10n | C_0402_1005Metric | C23, C25, C33 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 250 | R_0402_1005Metric | R1 |
| 3 | 1k5 | R_0402_1005Metric | R2, R5, R6 |
| 1 | 100k | R_0402_1005Metric | R3 |
| 1 | 20k | R_0402_1005Metric | R4 |
| 1 | 4.7k | R_0402_1005Metric | R18 |
DRV8313 simplefoc design files
The KiCad project lives in the Enderscheng/DRV8313_simplefoc_PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/elec3300.kicad_pcb
- SchematicHardware/elec3300.kicad_sch
DRV8313 simplefoc: common questions
How big is the DRV8313 simplefoc PCB?
The DRV8313 simplefoc measures 105 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DRV8313 simplefoc?
63 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the DRV8313 simplefoc design files?
From the Enderscheng/DRV8313_simplefoc_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DRV8313 simplefoc design in my own project?
The repository has no license, so all rights stay with Enderscheng. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979