PowerRail
engstad·PowerRail
About the PowerRail PCB
PowerRail is an open source PCB design by engstad, published on GitHub. It is a 4-layer board measuring 43.2 × 43.2 mm, with 57 components from 36 distinct parts.
Other key parts include the TPS65530 and VEC2616. By type, the board carries 23 capacitors, 18 resistors, 8 inductors, 3 diodes, 2 ICs and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
A quick and dirty PCB for a +12V/-7V power supply.
This is just a small KiCad project for yet another small PCB that I need. It's based on Analog Device's ADP5071 chip.

Main components on the PowerRail
PowerRail bill of materials (BOM)
57 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS65530 | qfn-48-p | U5 |
| 1 | VEC2616 | sot-28fl | U6 |
| 1 | USB_OTG | conn-smd-usb-b-mini | P13 |
| 1 | JTI-PWR | b2b-ph-kl | P15 |
| 1 | VAL** | hole_3mm | hole_3mm |
| 3 | 30V/0.5A | diode-sod-123 | D4, D5, D6 |
| 2 | 4.7uH/1.9A | inductor-smd-40x40 | L10, L15 |
| 3 | 12uH | inductor-smd-4.5x4.5x3.2 | L11, L12, L13 |
| 1 | 4.7uF/1.0A | inductor-smd-40x40 | L14 |
| 1 | 4.7uH/1.65A | inductor-smd-40x40 | L16 |
| 1 | 3.3uH/3.3A | inductor-smd-2020-50x50 | L17 |
| 5 | 10uF | SM1206 | C27, C28, C31, C32, C45 |
| 2 | 10uF | SM0805 | C29, C48 |
| 1 | 1.0u | SM0603 | C30 |
| 1 | 3.3uF | SM0805 | C33 |
| 1 | 4.7u | SM0805 | C34 |
| 2 | 10.0u | SM1206 | C35, C37 |
| 2 | 0.1u | SM0603 | C36, C38 |
| 2 | 47.0u | SM1206 | C39, C40 |
| 4 | 22u | SM1206 | C41, C42, C43, C44 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22uF | SM1206 | C46, C47 |
| 1 | C_Small | SM0603 | C49 |
| 1 | 550k | SM0603 | R15 |
| 1 | 85.0k | SM0603 | R16 |
| 1 | 15.0k | SM0603 | R17 |
| 1 | 50.0k | SM0603 | R18 |
| 1 | 660k | SM0603 | R19 |
| 1 | 10 | SM0603 | R20 |
| 1 | 10k | SM0603 | R21 |
| 1 | 453k | SM0603 | R24 |
| 2 | 220k | SM0603 | R25, R28 |
| 1 | 150k | SM0603 | R26 |
| 1 | 440k | SM0603 | R27 |
| 2 | 820k | SM0603 | R29, R31 |
| 2 | 180k | SM0603 | R30, R32 |
| 2 | 330k | SM0603 | R33, R34 |
PowerRail design files
The KiCad project lives in the engstad/PowerRail repository on GitHub; these links point at the commit this page was built from.
- LayoutPowerRail.kicad_pcb
PowerRail: common questions
How big is the PowerRail PCB?
The PowerRail measures 43.2 × 43.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PowerRail?
57 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the PowerRail design files?
From the engstad/PowerRail repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PowerRail design in my own project?
The repository has no license, so all rights stay with engstad. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k