HardLabs

Oitavo DuplaFace

EngTarcisioSm·KiCad_Curso·Projetos/Oitavo_DuplaFace/Oitavo_DuplaFace.kicad_pcb

Oitavo DuplaFace PCB layout, top view — open source PIC board by EngTarcisioSm

About the Oitavo DuplaFace PCB

Oitavo DuplaFace is an open source PIC PCB design by EngTarcisioSm, published on GitHub. It is a 2-layer board measuring 82.6 × 52.1 mm, with 10 components from 9 distinct parts.

Its main chip is the PIC16F628A-IP, from the PIC family. By type, the board carries 3 connectors, 3 capacitors, 1 IC, 1 crystal, 1 switch and 1 resistor.

From the project

- Com o KiCad aberto, ao clicar em "A", será aberto uma nova janela com todos os componentes disponiveis para o KiCad - No espaço filtro digitando apenas uma letra é possivel encontrar de forma rápida alguns compenetes - "r" resistor - "c" capacitor - "l" indutor - "c_p" capacito

- Com o KiCad aberto, ao clicar em "A", será aberto uma nova janela com todos os componentes disponiveis para o KiCad - No espaço filtro digitando apenas uma letra é possivel encontrar de forma rápida alguns compenetes - "r" resistor - "c" capacitor - "l" indutor - "c_p" capacitor polarizado - "crys cristal ↑

- Exemplo QuintoOrganizaçãoMicroprocessado - Utilizar labels, para cria-las pressionar a tecla "L" - Por mais que fisicamente no desenho não exista a conexão o programa entende que existe sim aquela conexão fisica - É interessante separar trechos do circuito com linhas tracejadas que…

Oitavo DuplaFace, from the project README
From the project README

Main components on the Oitavo DuplaFace

PIC16F628A-IP

Oitavo DuplaFace bill of materials (BOM)

10 components, 9 distinct parts.

QtyPartRefs
1
PIC16F628A-IP
U1
1
Crystal
Y1
1
Conn_01x08
J1
1
Conn_01x05
J2
1
Conn_01x02
J3
1
SW_MEC_5G
SW1
2
22pF
C1, C2
1
100nF
C3
1
10k
R1

Oitavo DuplaFace design files

The KiCad project lives in the EngTarcisioSm/KiCad_Curso repository on GitHub; these links point at the commit this page was built from.

Oitavo DuplaFace: common questions

What microcontroller does the Oitavo DuplaFace use?

The Oitavo DuplaFace is built around the PIC16F628A-IP, from the PIC family.

How big is the Oitavo DuplaFace PCB?

The Oitavo DuplaFace measures 82.6 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Oitavo DuplaFace?

10 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Oitavo DuplaFace design files?

From the EngTarcisioSm/KiCad_Curso repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Oitavo DuplaFace design in my own project?

The repository has no license, so all rights stay with EngTarcisioSm. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Oitavo DuplaFace without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in KiCad_Curso

Similar boards