DecimoPrimeiro ProjetoFinal
About the DecimoPrimeiro ProjetoFinal PCB
DecimoPrimeiro ProjetoFinal is an open source PIC PCB design by EngTarcisioSm, published on GitHub. It is a 2-layer board measuring 66.6 × 51.8 mm, with 30 components from 16 distinct parts.
Its main chip is the PIC18F4550-IPT, from the PIC family. Other key parts include the LD1117S50TR_SOT223. By type, the board carries 8 resistors, 7 connectors, 6 capacitors, 5 diodes, 2 ICs and 1 crystal.
From the project
- Com o KiCad aberto, ao clicar em "A", será aberto uma nova janela com todos os componentes disponiveis para o KiCad - No espaço filtro digitando apenas uma letra é possivel encontrar de forma rápida alguns compenetes - "r" resistor - "c" capacitor - "l" indutor - "c_p" capacito
- Com o KiCad aberto, ao clicar em "A", será aberto uma nova janela com todos os componentes disponiveis para o KiCad - No espaço filtro digitando apenas uma letra é possivel encontrar de forma rápida alguns compenetes - "r" resistor - "c" capacitor - "l" indutor - "c_p" capacitor polarizado - "crys cristal ↑
- Exemplo QuintoOrganizaçãoMicroprocessado - Utilizar labels, para cria-las pressionar a tecla "L" - Por mais que fisicamente no desenho não exista a conexão o programa entende que existe sim aquela conexão fisica - É interessante separar trechos do circuito com linhas tracejadas que…
Main components on the DecimoPrimeiro ProjetoFinal
DecimoPrimeiro ProjetoFinal bill of materials (BOM)
30 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | PIC18F4550-IPT | TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | 16MHz | Crystal_HC18-U_Vertical | Y1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | FUNC | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | USB | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | DIGITAL | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | ANALOG | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | SW_MEC_5G | SW_PUSH_6mm_H4.3mm | SW1 |
| 5 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 1 | 100uF | CP_Elec_6.3x7.7 | C1 |
| 3 | 100nF | C_0805_2012Metric | C2, C5, C6 |
| 2 | 22pF | C_0805_2012Metric | C3, C4 |
| 5 | 220 | R_0805_2012Metric | R1, R3, R4, R5, R6 |
| 3 | 10k | R_0805_2012Metric | R2, R7, R8 |
DecimoPrimeiro ProjetoFinal design files
The KiCad project lives in the EngTarcisioSm/KiCad_Curso repository on GitHub; these links point at the commit this page was built from.
DecimoPrimeiro ProjetoFinal: common questions
What microcontroller does the DecimoPrimeiro ProjetoFinal use?
The DecimoPrimeiro ProjetoFinal is built around the PIC18F4550-IPT, from the PIC family.
How big is the DecimoPrimeiro ProjetoFinal PCB?
The DecimoPrimeiro ProjetoFinal measures 66.6 × 51.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DecimoPrimeiro ProjetoFinal?
30 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the DecimoPrimeiro ProjetoFinal design files?
From the EngTarcisioSm/KiCad_Curso repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DecimoPrimeiro ProjetoFinal design in my own project?
The repository has no license, so all rights stay with EngTarcisioSm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DecimoPrimeiro ProjetoFinal without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in KiCad_Curso
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376