HardLabs

Control Panel Mega Shield bak 2

Enthusela·DesktopControlPanel·pcbs/Control Panel Mega Shield/Control Panel Mega Shield_bak_2.kicad_pcb

Control Panel Mega Shield bak 2 layout, top view — open source AVR/Arduino board by Enthusela

About the Control Panel Mega Shield bak 2

Control Panel Mega Shield bak 2 is an open source AVR/Arduino PCB design by Enthusela, published on GitHub. It is a 2-layer board measuring 104.1 × 55.9 mm, with 6 components from 6 distinct parts.

Its main chip is the Arduino_Mega2560_Shield, from the AVR/Arduino family. By type, the board carries 3 connectors and 2 switches.

It belongs with the dev boards & breakouts, displays & leds and audio designs in this gallery.

From the project

An open-source, hand-built, tactile, home-brew smart-home hub with analog PC audio monitoring and control.

An open-source, hand-built, tactile, home-brew smart-home hub with analog PC audio monitoring and control.

ARGB LED device control with HSV and color-temperature control modes App-based volume mixing in Windows, including OS/Game/Discord channels Motorised knobs enable multiple control modes on a single set of inputs Mains power control: Toggle switches control mains power to the PC, monitors, and speakers via rental-safe RF-based remote-control mains outlets. Analog audio monitoring: PC soundcard connects to VU meters and IN-9 Nixie Tubes for level and 3-band spectrum monitoring…

Control Panel Mega Shield bak 2 bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
0397730002
IDC_SW
Molex
J1
1
0397730002
Screw_Terminal_01x03
Molex
J2
1
IDC_RF
J4
1
SW_DIP_x02
SW1
1
SW_Push
SW2
1
Arduino_Mega2560_Shield
XA1

Control Panel Mega Shield bak 2 design files

The KiCad project lives in the Enthusela/DesktopControlPanel repository on GitHub; these links point at the commit this page was built from.

Control Panel Mega Shield bak 2: common questions

What microcontroller does the Control Panel Mega Shield bak 2 use?

The Control Panel Mega Shield bak 2 is built around the Arduino_Mega2560_Shield, from the AVR/Arduino family.

How big is the Control Panel Mega Shield bak 2?

The Control Panel Mega Shield bak 2 measures 104.1 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control Panel Mega Shield bak 2?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Control Panel Mega Shield bak 2 design files?

From the Enthusela/DesktopControlPanel repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Control Panel Mega Shield bak 2 design in my own project?

The repository has no license, so all rights stay with Enthusela. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Control Panel Mega Shield bak 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in DesktopControlPanel

Similar boards