BEC
EOLab-HSRW·drones·protoflyer/electronics/BEC/BEC.kicad_pcb
About the BEC PCB
BEC is an open source PCB design by EOLab-HSRW, published on GitHub. It is a 4-layer board measuring 35.7 × 22.9 mm, with 20 components from 15 distinct parts.
Other key parts include the INA139 and TLVM13660. By type, the board carries 4 connectors, 3 capacitors, 3 resistors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
Main source of information for EOLab's drones.
Main components on the BEC
BEC bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA139 | SOT-23-5 | U1 |
| 1 | TLVM13660 | B3QFN20_RDL_TEX | U3 |
| 2 | Conn_01x03_Pin | SHDR3W80P0X250_1X3_1000X600X950P | J1, J5 |
| 1 | Conn_01x06_Pin | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 22pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C_FF1 |
| 2 | 10uF, 50V, X7R | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C_IN1, C_IN2 |
| 2 | 47uF, 10V, X7R | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C_OUT1, C_OUT2 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_FBB1 |
| 1 | 40.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_FBT1 |
| 1 | 13k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_RT1 |
| 3 | 0.1u, 10V, X7R | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3 |
| 1 | 68k, 1%, 1/16W | R_0402_1005Metric | R1 |
| 1 | 10k, 1%, 1/16W | R_0402_1005Metric | R2 |
| 1 | 54.9k, 1%, 1/16W | R_0402_1005Metric | R3 |
BEC design files
The KiCad project lives in the EOLab-HSRW/drones repository on GitHub; these links point at the commit this page was built from.
BEC: common questions
How big is the BEC PCB?
The BEC measures 35.7 × 22.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BEC?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the BEC design files?
From the EOLab-HSRW/drones repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BEC design in my own project?
The repository has no license, so all rights stay with EOLab-HSRW. Use it as a reference, and ask the author before reusing the design.
More boards in drones
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979