4 open source boards using the INA139
Real designs built with the INA139, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
TinyFISH
fishpepper
20 × 20 mm88 parts2LCERN-OHL-1.241STM32
PCMC control
qiuniangdu
57.1 × 39.6 mm90 parts4LMIT0BEC
EOLab-HSRW
35.7 × 22.9 mm20 parts4LNo license0STM32
Psu
adamgreig
100 × 100 mm137 parts2LNo license0
The INA139 in open source designs
The gallery holds 4 open source boards using the INA139 from 4 GitHub repositories; a typical one measures about 46.4 × 31.2 mm and carries around 89 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is TinyFISH by fishpepper.
Microcontrollers on boards using the INA139
What boards using the INA139 are built for
INA139: common questions
Where can I find a INA139 reference design?
Each of the 4 boards on this page is a real design using the INA139. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA139 use?
Most are built on STM32 (3).
How big is a typical board using the INA139?
The median is 46.4 × 31.2 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA139?
By GitHub stars, TinyFISH by fishpepper, with 41 stars.
Can I simulate one of these boards using the INA139 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.