Digir

Espeer5·digir·src/BPM/hw/timing/clk_pt/clk_pt.kicad_pcb

Digir PCB layout, top view — open source board by Espeer5

About the Digir PCB

Digir is an open source PCB design by Espeer5, published on GitHub. It is a 4-layer board measuring 60 × 40 mm, with 33 components from 17 distinct parts.

Other key parts include the CVHD-950x, Si5351C-B-GM and MCP4821. By type, the board carries 11 resistors, 9 capacitors, 7 connectors, 3 ICs, 1 test point and 1 diode.

It belongs with the rf & radio designs in this gallery.

From the project

An open source, modular, extensible mobile digital-mode radio transceiver design.

The DigiR project is an effort to build a fully open source embedded mobile digital mode transciever design for ham operators. Many digital modes tend to require taking a computer running ham software into the field to make connections, which I consider to be a limitation in comparison to analog modes. This project is designed to remove that hurdle by creating a fully embedded platform that enables mobile digital operations.

Main components on the Digir

Digir bill of materials (BOM)

33 components, 17 distinct parts.

QtyPartRefs
1
CVHD-950x
Crystek
U1
1
Si5351C-B-GM
U2
1
MCP4821
U3
1
5351 CTL HDR
J1
1
DAC CTL HDR
J2
3
~
J3, J4, J7
1
CLK HDR
J5
1
PWR HDR
J6
1
TestPoint
TP1
1
PWR LED
D1
1
0Ω
FB1
7
100nF
C1, C2, C3, C4, C5, C6, C7
1
10 µF
C8
1
10µF
C9
5
4.7kΩ
R1, R3, R4, R5, R9
5
0Ω
R2, R6, R7, R8, R11
1
680Ω
R10

Digir design files

The KiCad project lives in the Espeer5/digir repository on GitHub; these links point at the commit this page was built from.

Digir: common questions

How big is the Digir PCB?

The Digir measures 60 × 40 mm, has 4 copper layers and is 1.5982 mm thick.

How many components are on the Digir?

33 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Digir design files?

From the Espeer5/digir repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Digir design in my own project?

The repository has no license, so all rights stay with Espeer5. Use it as a reference, and ask the author before reusing the design.

Similar boards