10 open source boards using the MCP4821
Real designs built with the MCP4821, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Quantizer
Quinienl
30 × 100 mm38 parts2LNo license18Eurorack Dexy Module
Len42
50.5 × 108.2 mm70 parts2LNo license4ESP8266
Esp8266-web eload
dimtass
115 × 77 mm70 parts2LNo license1Batradio
SietseAchterop
65 × 56 mm62 parts2LNo license1- schematic only · 58 partsAVR/Arduino
NetToBOM
Len42
58 partsMIT1 RP2040/RP2350
V0.1
KarimHacen7
90 × 90 mm48 parts2LNo license0Digir
Espeer5
60 × 40 mm33 parts4LNo license0RP2040/RP2350
V0.2
KarimHacen7
80 × 90 mm48 parts2LNo license0RP2040/RP2350
V0.3
KarimHacen7
80 × 90 mm48 parts2LNo license0Adaptador MCP4821
KarimHacen7
23 × 20 mm3 parts2LNo license0
How designs wire the MCP4821
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP4821 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 50% · a signal 50% |
|
| SHDNpin 6 | Connected to: Signal 67% · 3.3V 33% |
|
| VSSpin 7 | Connected to: GND 83% · a signal 17% | — |
| VOUTpin 8 | Connected to: Signal 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Quantizer by Quinienl, Eurorack Dexy Module by Len42, Esp8266-web eload by dimtass and Batradio by SietseAchterop.
The MCP4821 in open source designs
The gallery holds 10 open source boards using the MCP4821 from 7 GitHub repositories; a typical one measures about 65 × 90 mm and carries around 48 components.
89% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Quantizer by Quinienl.
Parts used alongside the MCP4821
Microcontrollers on boards using the MCP4821
What boards using the MCP4821 are built for
MCP4821: common questions
Where can I find a MCP4821 reference design?
Each of the 10 boards on this page is a real design using the MCP4821. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP4821 VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the MCP4821.
Which microcontrollers do boards using the MCP4821 use?
Most are built on RP2040/RP2350 (3), AVR/Arduino (2) and ESP8266 (1).
How big is a typical board using the MCP4821?
The median is 65 × 90 mm, and 89% are two-layer designs.
What is the most popular open source board using the MCP4821?
By GitHub stars, Quantizer by Quinienl, with 18 stars.
Can I simulate one of these boards using the MCP4821 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.