Mcu kort
ETAChalmers·Discosoffa·electronics/mcu-kort/mcu-kort.kicad_pcb
About the Mcu kort PCB
Mcu kort is an open source PCB design by ETAChalmers, published on GitHub. It is a 2-layer board measuring 160 × 100 mm, with 14 components from 14 distinct parts.
Other key parts include the LM2574HVN-5 and NUCLEO64-F401RE. By type, the board carries 3 resistors, 2 ICs, 2 connectors, 2 capacitors, 1 transistor and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
Repo för allt vad gäller den fabulösa Discosoffan!
Discosoffans batteripack är på 5-celler seriellt (5S). För detta behövs en modul per cell, varav en är master.
Följande är de konfigurationer Discosoffans BMS-moduler använder. Dessa anges i config.h.
BMS-modulerna är monterade i 3D-printade hållare. 3D STEP-filerna till dessa finns i bms_box. Dessa ser ut som nedan:

Main components on the Mcu kort
Mcu kort bill of materials (BOM)
14 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2574HVN-5 | DIP-8_W7.62mm | U1 |
| 1 | NUCLEO64-F401RE | MODULE_NUCLEO-F401RE.pretty | U2 |
| 1 | Godtycklig | SOT-23 | Q1 |
| 1 | IDE PATA Connector | IDC-Header_2x20_P2.54mm_Vertical | J1 |
| 1 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J2 |
| 1 | 0.5A | SMD_Fuse_holder | F1 |
| 1 | Piezo | L_Radial_D10.0mm_P5.00mm_Fastron_07M | LS1 |
| 1 | 11DQ06 | D_A-405_P10.16mm_Horizontal | D1 |
| 1 | 330uH | L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1 |
| 1 | 22uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 220uF | CP_Elec_10x7.9 | C2 |
| 1 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 56k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 8.2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
Mcu kort design files
The KiCad project lives in the ETAChalmers/Discosoffa repository on GitHub; these links point at the commit this page was built from.
Mcu kort: common questions
How big is the Mcu kort PCB?
The Mcu kort measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mcu kort?
14 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mcu kort design files?
From the ETAChalmers/Discosoffa repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mcu kort design in my own project?
The repository has no license, so all rights stay with ETAChalmers. Use it as a reference, and ask the author before reusing the design.
More boards in Discosoffa
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k