LA0W5
etherkit·LA0W5·pcb/LA0W5.kicad_pcb
About the LA0W5 PCB
LA0W5 is an open source PCB design by etherkit, published on GitHub. It is a 2-layer board measuring 60 × 50 mm, with 39 components from 28 distinct parts.
Other key parts include the INA193 and LP2985-3.3. By type, the board carries 11 capacitors, 11 resistors, 5 connectors, 3 transistors, 3 test points and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
500 mW Linear Amplifier for HF and VHF
LA0W5 500 mW Linear Amplifier for HF and VHF ===========================================
Main components on the LA0W5
LA0W5 bill of materials (BOM)
39 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA193 | SOT23-5 | U1 |
| 1 | LP2985-3.3 | SOT23-5 | U2 |
| 1 | LPFModule | LPFModule | M1 |
| 1 | 2N7002 | SOT23-2N7002 | Q1 |
| 1 | MMBT4403 | SOT23-MMBT440X | Q2 |
| 1 | RD00HVS1 | RD00HVS1 | Q3 |
| 1 | 2.1 mm Barrel Jack | DCPOWER-KOBICONN-163-7620-E | J1 |
| 1 | VDD | Pin_Header_Straight_1x02 | J2 |
| 1 | CONN_01X03 CONN_01X04 | Pin_Header_Straight_1x04 | J3 |
| 2 | SMA-F | SMA-ENDLAUNCH | J4, J7 |
| 1 | TX ON | SOLDER_JUMPER | JP1 |
| 1 | GATE BIAS | SOLDER_JUMPER | JP2 |
| 1 | GND | Measurement_Point_Square-TH_Small | TP1 |
| 1 | BIAS V | Measurement_Point_Square-TH_Small | TP2 |
| 1 | PA I | Measurement_Point_Square-TH_Small | TP3 |
| 1 | FB2402-43 5T | BN2402 | L1 |
| 4 | 10N 10n | C_0805_HandSoldering | C1, C3, C6, C10 |
| 3 | 100N 100n | C_0805_HandSoldering | C2, C7, C8 |
| 2 | 1u | C_0805_HandSoldering | C4, C5 |
| 2 | 4.7U 4.7u | C_0805_HandSoldering | C9, C11 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22K 22k | R_0805_HandSoldering | R1, R3, R5 |
| 2 | R | R_0805_HandSoldering | R2, R6 |
| 1 | 0 | R_0805_HandSoldering | R4 |
| 1 | 10 | R_0805_HandSoldering | R7 |
| 1 | 3.3K 3.3k | R_0805_HandSoldering | R8 |
| 1 | 56 | R_0805_HandSoldering | R9 |
| 1 | 0.5 1% | R_0805_HandSoldering | R10 |
| 1 | 10k | TC33X-2 | R11 |
LA0W5 design files
The KiCad project lives in the etherkit/LA0W5 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/LA0W5.kicad_pcb
- BOMpcb/LA0W5.csv
LA0W5: common questions
How big is the LA0W5 PCB?
The LA0W5 measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LA0W5?
39 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LA0W5 design files?
From the etherkit/LA0W5 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LA0W5 design in my own project?
The repository has no license, so all rights stay with etherkit. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687