Seriallight
About the Seriallight PCB
Seriallight is an open source AVR/Arduino PCB design by eurovibes, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 59 components from 21 distinct parts.
Its main chip is the ATtiny404-SS, from the AVR/Arduino family. Other key parts include the L78M05, BCR421UW6 and SP3485CN. By type, the board carries 34 diodes, 8 resistors, 7 ICs, 5 connectors, 4 capacitors and 1 fuse.
From the project
Enlight the shiny Berlin S-Bahn character lights
Main components on the Seriallight
Seriallight bill of materials (BOM)
59 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78M05 | TO-252-2 | U101 |
| 4 | BCR421UW6 | SOT-23-6 | U102, U103, U106, U107 |
| 1 | ATtiny404-SS | SOIC-14_3.9x8.7mm_P1.27mm | U104 |
| 1 | SP3485CN | SOIC-8_3.9x4.9mm_P1.27mm | U105 |
| 2 | PWR | TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J101, J108 |
| 1 | Debug | PinHeader_1x03_P2.54mm_Vertical | J102 |
| 2 | RS485 | TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J107, J109 |
| 1 | 750mA | Fuse_1812_4532Metric_Castellated | F101 |
| 16 | LED | LED_Cree-XQ | D101, D102, D103, D104, D105, D106, D107, D108 +8 |
| 4 | red | LED_0603_1608Metric | D117, D119, D121, D123 |
| 4 | green | LED_0603_1608Metric | D118, D120, D122, D124 |
| 4 | blue | LED_0603_1608Metric | D125, D127, D129, D131 |
| 4 | white | LED_0603_1608Metric | D126, D128, D130, D132 |
| 1 | SS14 | D_SMA | D133 |
| 1 | SM4007 | D_MELF | D134 |
| 1 | 10µ | C_0805_2012Metric | C101 |
| 1 | 22µ | C_0805_2012Metric | C102 |
| 1 | 1µ | C_0402_1005Metric | C103 |
| 1 | 100n | C_0402_1005Metric | C104 |
| 4 | 82 | R_0402_1005Metric | R101, R102, R105, R106 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1k | R_0402_1005Metric | R103, R104, R107, R108 |
Seriallight design files
The KiCad project lives in the eurovibes/seriallight repository on GitHub; these links point at the commit this page was built from.
- Layoutseriallight.kicad_pcb
Seriallight: common questions
What microcontroller does the Seriallight use?
The Seriallight is built around the ATtiny404-SS, from the AVR/Arduino family.
How big is the Seriallight PCB?
The Seriallight measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Seriallight?
59 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Seriallight design files?
From the eurovibes/seriallight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Seriallight design in my own project?
The repository has no license, so all rights stay with eurovibes. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Seriallight without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k