26 open source boards using the SP3485CN

Real designs built with the SP3485CN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the SP3485CN

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the SP3485CN connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 1 µF).
  • The B pin has a series resistor on 11 of 20 designs, most often 120 Ω (then 560 Ω).
  • The A pin has a series resistor on 9 of 20 designs, most often 120 Ω (then 470 Ω).
ROpin 1Connected to: The microcontroller 50%, a connector 30%
  • Series resistor on 30% · 4.7 kΩ (2), 1 kΩ (2), 10 kΩ (2)
DIpin 4Connected to: The microcontroller 55%, a connector 35%
  • Series resistor on 30% · 4.7 kΩ (2), 1 kΩ (2), 470 Ω (1)
GNDpin 5Connected to: GND 90%
Apin 6Connected to: A connector 70%
  • Series resistor on 45% · 120 Ω (7), 470 Ω (1), 10 Ω (1)
Bpin 7Connected to: A connector 70%
  • Series resistor on 55% · 120 Ω (9), 560 Ω (1), 470 Ω (1)
VCCpin 8Connected to: 3.3V 90%
  • Decoupling capacitor on 65% · 100 nF (11), 1 µF (1), 10 µF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hw cpu by andreili, Stm8s001rs485 by TG9541, Rs485-ch340e by TG9541 and RS485 by FYNCH-BIO.

The SP3485CN in open source designs

The gallery holds 26 open source boards using the SP3485CN from 20 GitHub repositories; a typical one measures about 62 × 56.5 mm and carries around 63 components.

73% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.

The most starred is Hw cpu by andreili.

Microcontrollers on boards using the SP3485CN

SP3485CN: common questions

Where can I find a SP3485CN reference design?

Each of the 26 boards on this page is a real design using the SP3485CN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SP3485CN VCC pin?

The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the SP3485CN.

What resistor goes on the SP3485CN B pin?

The B pin has a series resistor on 11 of 20 designs, most often 120 Ω (then 560 Ω). Counted from the KiCad layouts of 20 open source designs using the SP3485CN.

What resistor goes on the SP3485CN A pin?

The A pin has a series resistor on 9 of 20 designs, most often 120 Ω (then 470 Ω). Counted from the KiCad layouts of 20 open source designs using the SP3485CN.

What parts are used alongside the SP3485CN?

The 74LS08, AMS1117-3.3, CH340E, LM1117-3.3 and LM358 appear in the most repositories here.

Which microcontrollers do boards using the SP3485CN use?

Most are built on AVR/Arduino (6), ESP32 (6), STM32 (4) and ESP8266 (1).

How big is a typical board using the SP3485CN?

The median is 62 × 56.5 mm, and 73% are two-layer designs.

What is the most popular open source board using the SP3485CN?

By GitHub stars, Hw cpu by andreili, with 66 stars.

Can I simulate one of these boards using the SP3485CN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part