Mini-Swerve
Eventide-03·Mini-Swerve·PCB/swerve carrier board.kicad_pcb
About the Mini-Swerve PCB
Mini-Swerve is an open source PCB design by Eventide-03, published on GitHub. It is a 2-layer board measuring 120 × 120 mm, with 14 components from 13 distinct parts.
By type, the board carries 6 connectors, 2 capacitors and 1 switch.
It belongs with the robotics & motion, power & battery and dev boards & breakouts designs in this gallery.
From the project
Designing and Building a mini version of a Swerve drive, commonly used in FRC, FTC, and VEX Robotics competitions. Utilizing custom circuitry and software in order to replicate the FRC Environment at a smaller scale.
A fully custom four-module swerve drivetrain built to replicate the FRC/FTC swerve drivetrains. Every part of this project was designed/planned by me.
- CAD (Onshape) — full mechanical assembly and exploded views - Bill of Materials (Google Sheets) — every part, quantity, and source - Calculations (Google Docs) — gear ratios, motor sizing, and drivetrain math
Mini-Swerve bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VIN+ | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | VIN- | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | VOUT+ | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | VOUT- | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x22_Pin | PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | Conn_01x22_Pin | PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Right | J6 |
| 1 | DSHOT to SpeedyBee | PinHeader_1x05_P2.54mm_Vertical | J_DSHOT1 |
| 1 | RX_ELRS | PinHeader_1x04_P2.54mm_Vertical | J_ELRS1 |
| 1 | TL Steering Controller | PinHeader_1x06_P2.54mm_Vertical | J_STEER1 |
| 1 | TR Steering Controller | PinHeader_1x06_P2.54mm_Vertical | J_STEER2 |
| 1 | Power input from battery | PinHeader_1x02_P2.54mm_Vertical | J_VBAT1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1 |
| 2 | C | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
Mini-Swerve design files
The KiCad project lives in the Eventide-03/Mini-Swerve repository on GitHub; these links point at the commit this page was built from.
Mini-Swerve: common questions
How big is the Mini-Swerve PCB?
The Mini-Swerve measures 120 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mini-Swerve?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mini-Swerve design files?
From the Eventide-03/Mini-Swerve repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mini-Swerve design in my own project?
The repository has no license, so all rights stay with Eventide-03. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k