Atmega32u4 breakout
everyday-dev·atmega32u4_breakout·atmegaXu4_breakout/atmegaXu4_breakout.kicad_pcb
About the Atmega32u4 breakout
Atmega32u4 breakout is an open source AVR/Arduino PCB design by everyday-dev, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 20 × 50.5 mm, with 33 components from 21 distinct parts.
Its main chip is the ATmega32U4-MU, from the AVR/Arduino family. Other key parts include the AP2127K-3.3. By type, the board carries 10 resistors, 7 capacitors, 4 connectors, 4 diodes, 3 test points and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Breakout and Development board for the ATmega32u4-MU MCU from Atmel
The ATmega32u4 breakout board makes it easy to get up and going with an AVR Microcontroller with plenty of IO features such as SPI, TWI, and UART as well as a Full-Speed USB interface. Standard pitch spacing on the headers allow it to be inserted into a breadboard and used for prototyping or through-hole soldered down onto a larger project/carrier board.
The getting started guide, hardware documentation and example firwmare for this board is available at os.everydaydev.io. If you'd like to build one yourself, the latest Gerber files and schematics can be found in the Release section on…

Main components on the Atmega32u4 breakout
Atmega32u4 breakout bill of materials (BOM)
33 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-MU | QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | AP2127K-3.3 | SOT-23-5 | U2 |
| 1 | ABM11-16.000MHZ-12-N1G-T | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | USB4085 USB_C_Receptacle_USB2.0 GCT | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Header-West | PinHeader_1x18_P2.54mm_Vertical | J2 |
| 1 | Header-East | PinHeader_1x18_P2.54mm_Vertical | J3 |
| 1 | AVR-ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | nUSR_PB | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | nRST_PB | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 3 | TestPoint_Small | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP3, TP4, TP5 |
| 1 | BAT54HT1G | D_SOD-323 | D1 |
| 1 | 5V | LED_0603_1608Metric | D2 |
| 1 | 3V3 | LED_0603_1608Metric | D3 |
| 1 | STAT | LED_0603_1608Metric | D4 |
| 3 | 1uF | C_0402_1005Metric | C1, C2, C3 |
| 2 | .1uF | C_0402_1005Metric | C4, C5 |
| 2 | 12pF | C_0402_1005Metric | C6, C7 |
| 2 | 22 | R_0402_1005Metric | R1, R2 |
| 3 | 470 | R_0402_1005Metric | R3, R4, R5 |
| 2 | 5.1k | R_0402_1005Metric | R6, R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_0402_1005Metric | R8, R9, R10 |
Atmega32u4 breakout design files
The KiCad project lives in the everyday-dev/atmega32u4_breakout repository on GitHub; these links point at the commit this page was built from.
Atmega32u4 breakout: common questions
What microcontroller does the Atmega32u4 breakout use?
The Atmega32u4 breakout is built around the ATmega32U4-MU, from the AVR/Arduino family.
How big is the Atmega32u4 breakout?
The Atmega32u4 breakout measures 20 × 50.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Atmega32u4 breakout?
33 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Atmega32u4 breakout design files?
From the everyday-dev/atmega32u4_breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Atmega32u4 breakout design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which everyday-dev chose for the repository.
Can I test firmware for the Atmega32u4 breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k