Power Commuter Board V2
About the Power Commuter Board V2
Power Commuter Board V2 is an open source PCB design by evolutek, published on GitHub. It is a 2-layer board measuring 65 × 50 mm, with 48 components from 22 distinct parts.
Other key parts include the INA219AxD, NCP718xSN330, LTC2952IF#PBF, TPS3808DBV and NE555D. By type, the board carries 16 resistors, 12 capacitors, 7 ICs, 7 transistors, 4 diodes and 1 jumper.
Main components on the Power Commuter Board V2
Power Commuter Board V2 bill of materials (BOM)
48 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA219AxD | TSOT-23-8 | U1 |
| 1 | NCP718xSN330 | SOT-23-5 | U2 |
| 1 | LTC2952IF#PBF | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | TPS3808DBV | SOT-23-6 | U4 |
| 1 | NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | 74AUP1G02 | SOT-353_SC-70-5 | U6, U7 |
| 2 | Si7997DP | PowerPak-SO8_5.15x6.15mm_Pitch1.27mm_Dual | Q1, Q2 |
| 5 | Q_NMOS_GSD | SOT-23 | Q3, Q4, Q5, Q6, Q7 |
| 1 | Jumper_NO_Small | PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | 0.002 | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | RSHUNT1 |
| 2 | MBR60 | TO-220-3_Horizontal_TabDown | D1, D2 |
| 2 | D | D_SOD-523 | D3, D4 |
| 7 | 100nF | C_0603_1608Metric | C1, C4, C5, C6, C9, C10, C11 |
| 2 | 1uF | C_0603_1608Metric | C2, C3 |
| 1 | 560nF | C_0603_1608Metric | C7 |
| 1 | 780nF | C_0603_1608Metric | C8 |
| 1 | 4.7uF | C_0603_1608Metric | C12 |
| 3 | 4.7k | R_0603_1608Metric | R1, R2, R6 |
| 7 | 10k | R_0603_1608Metric | R3, R4, R5, R7, R9, R15, R16 |
| 2 | 78.7k | R_0603_1608Metric | R8, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 330 | R_0603_1608Metric | R11, R12, R13 |
| 1 | 1k | R_0603_1608Metric | R14 |
Power Commuter Board V2 design files
The KiCad project lives in the evolutek/carte-alim repository on GitHub; these links point at the commit this page was built from.
Power Commuter Board V2: common questions
How big is the Power Commuter Board V2?
The Power Commuter Board V2 measures 65 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Commuter Board V2?
48 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Commuter Board V2 design files?
From the evolutek/carte-alim repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Power Commuter Board V2 design in my own project?
The repository has no license, so all rights stay with evolutek. Use it as a reference, and ask the author before reusing the design.
More boards in carte-alim
STM32Carte Alim
115 × 65 mm132 parts2LNo license0
Hub puissance V1
55 × 50 mm32 parts2LNo license0
Mini carte alim V2
85 × 50 mm32 parts2LNo license0
Min carte au
50 × 30 mm23 parts2LNo license0
USB C montage panneau
17 × 27 mm3 parts2LNo license0
Carte Rack Batterie Horizontal V1
30 × 40 mm3 parts2LNo license0
Carte Boitier BAU
36 × 24 mm3 parts2LNo license0
Micro Carte Alim V1
14 × 3.6 mm3 parts2LNo license0
Earlier revisions in the repo: Power Commuter Board V1