12 open source boards using the NCP718xSN330
Real designs built with the NCP718xSN330, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Carte Alim
evolutek
115 × 65 mm132 parts2LNo license0STM32
Mainboard
evolutek
115 × 70 mm116 parts2LNo license0Carte actionneurs
evolutek
70 × 70 mm115 parts2LNo license0PIC
Controle
mbouyer
83.6 × 76.7 mm81 parts2LBSD-3-Clause0ESP32
Main Board
jayalcock
55.4 × 54.6 mm64 parts2LNo license0Power Commuter Board V2
evolutek
65 × 50 mm48 parts2LNo license0Ui interface
evolutek
59 × 48.5 mm35 parts2LNo license0STM32
Carte stepper
evolutek
70 × 50 mm51 parts2LNo license0Constellation - Répartiteur Hololutek 2026
evolutek
100 × 33.1 mm50 parts2LNo license0Raspberry Pi
RPI Interface
evolutek
56 × 65 mm26 parts2LNo license0Carte adc
evolutek
35 × 35 mm23 parts2LNo license0Micro Carte Alim V1
evolutek
14 × 3.6 mm3 parts2LNo license0
How designs wire the NCP718xSN330
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NCP718xSN330 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 5 of 5 designs.
- The EN pin is tied to 5V on 5 of 5 designs.
- The OUT pin is tied to 3.3V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 100% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| OUTpin 5 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Carte actionneurs by evolutek, Carte Alim by evolutek, Mainboard by evolutek and Main Board by jayalcock.
The NCP718xSN330 in open source designs
The gallery holds 12 open source boards using the NCP718xSN330 from 5 GitHub repositories; a typical one measures about 67.5 × 52.3 mm and carries around 51 components.
100% are two-layer designs, the rest use four layers or more, and 8% carry an open source license.
The most starred is Carte Alim by evolutek.
Parts used alongside the NCP718xSN330
Microcontrollers on boards using the NCP718xSN330
What boards using the NCP718xSN330 are built for
NCP718xSN330: common questions
Where can I find a NCP718xSN330 reference design?
Each of the 12 boards on this page is a real design using the NCP718xSN330. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NCP718xSN330 IN pin connected?
The IN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the NCP718xSN330.
How is the NCP718xSN330 EN pin connected?
The EN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the NCP718xSN330.
How is the NCP718xSN330 OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the NCP718xSN330.
What parts are used alongside the NCP718xSN330?
The MCP2551-I-SN, STM32G491KEUx, SN74LVC1G11, SN74LVC1G32 and WE-TVS-82400102 appear in the most repositories here.
Which microcontrollers do boards using the NCP718xSN330 use?
Most are built on STM32 (3), ESP32 (1), PIC (1) and Raspberry Pi (1).
How big is a typical board using the NCP718xSN330?
The median is 67.5 × 52.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the NCP718xSN330?
By GitHub stars, Carte Alim by evolutek, with 0 stars.
Can I simulate one of these boards using the NCP718xSN330 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.