HardLabs

Paddle65-canoe

evyd13·paddle65-canoe-pcb·pcb/paddle65.kicad_pcb

Paddle65-canoe PCB layout, top view — open source AVR/Arduino board by evyd13

About the Paddle65-canoe PCB

Paddle65-canoe is an open source AVR/Arduino PCB design by evyd13, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 302.5 × 109.5 mm, with 182 components from 26 distinct parts.

Its main chip is the ATmega32U4, from the AVR/Arduino family. Other key parts include the USBLC6-2SC6. By type, the board carries 86 relays, 70 diodes, 8 capacitors, 6 resistors, 3 connectors and 2 ICs.

Paddle65-canoe, from the project README
From the project README

Main components on the Paddle65-canoe

ATmega32U4USBLC6-2SC6

Paddle65-canoe bill of materials (BOM)

182 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega32U4
U1
1
USBLC6-2SC6
U2
1
16mhz
X1
1
USB_mini_micro_B
J1
1
ISP
J2
1
UDB
J3
1
Polyfuse_Small
F1
62
KEYSW
K1, K2, K3, K4, K5, K6, K7, K8 +54
1
KEYSW
K14
8
KEYSW
K16, K43-1, K61-1, K62-2, K63-1, K70-2, K71-1, K72-1
2
KEYSW
K31, K58
7
KEYSW
K31-1, K46-1, K61, K62, K63, K70, K71
2
KEYSW
K44, K46
1
KEYSW
K44-1
1
KEYSW
K67
2
KEYSW
K67-1, K67-2
1
SW_PUSH
SW1
2
SK6812MINI-E
RGB1, RGB2
70
D
D1, D2, D3, D4, D5, D6, D7, D8 +62
2
LED
L1, L1-1
Show 6 more
QtyPartRefs
6
0.1u
C1, C2, C3, C4, C7, C8
1
10u
C5
1
1u
C6
2
22
R1, R2
2
10k
R3, R4
2
470
R5, R6

Paddle65-canoe design files

The KiCad project lives in the evyd13/paddle65-canoe-pcb repository on GitHub; these links point at the commit this page was built from.

Paddle65-canoe: common questions

What microcontroller does the Paddle65-canoe use?

The Paddle65-canoe is built around the ATmega32U4, from the AVR/Arduino family.

How big is the Paddle65-canoe PCB?

The Paddle65-canoe measures 302.5 × 109.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Paddle65-canoe?

182 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Paddle65-canoe design files?

From the evyd13/paddle65-canoe-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Paddle65-canoe design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which evyd13 chose for the repository.

Can I test firmware for the Paddle65-canoe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards