Usinage
About the Usinage PCB
Usinage is an open source PCB design by F6ITU, published on GitHub. It is a 2-layer board measuring 256 × 139 mm, with 84 components from 37 distinct parts.
Other key parts include the MCP23017_SO and LMZ22005. By type, the board carries 27 capacitors, 17 switches, 17 resistors, 7 connectors, 4 inductors and 3 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
OpenHPSDR console based on a Raspi CPU (LA2NI design after a G0ORX original idea)
'''PiHPSDR, a embedded SDR controler for the OpenHPSDR Software Defined Radio familly'''
This repository is a "pseudo fork" of a Raspberry Pi based SDR controler created by Kjell Karlsen LA2NI and Laurence Baker G8NJJ for the hardware project, and by John Melton G0ORX for the software part.
The original software repository could be found at https://github.com/g0orx/pihpsdr
Main components on the Usinage
Usinage bill of materials (BOM)
84 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | LMZ22005 | 7TO-PMOD | U2 |
| 1 | FDD6685 | TO-252-3_TabPin2 | Q1 |
| 1 | 2N7002K | SOT-23 | Q2 |
| 1 | ENC1 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 12V_SWITCHED | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 12V_IN | BarrelJack_CUI_PJ-063AH_Horizontal | J4 |
| 1 | 5V/3A | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | TO_DISPLAY | PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | ENC1a | HRPG-AXXX | J8 |
| 4 | Rotary_Encoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC2, ENC3, ENC4, ENC5 |
| 1 | 5A | Fuse_1206_3216Metric | F1 |
| 1 | ON_OFF | TL3301AF160QG | SW1 |
| 16 | SW_Push | TL3301AF160QG | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +8 |
| 1 | BAS16J | SOT-323_SC-70 | D1 |
| 1 | SK54 | D_SMC | D2 |
| 1 | Green | LED_D5.0mm | D3 |
| 3 | TBD | L_0603_1608Metric | FB1, FB2, FB3 |
| 1 | 74279226101 | L_1812_4532Metric | L1 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220u/10V | CP_EIA-7343-31_Kemet-D | C1 |
| 1 | 1n | C_0603_1608Metric | C2 |
| 7 | 10u | C_0603_1608Metric | C3, C10, C12, C20, C21, C24, C26 |
| 3 | 1u | C_0603_1608Metric | C4, C13, C17 |
| 10 | 100n | C_0603_1608Metric | C5, C6, C7, C9, C11, C14, C15, C18 +2 |
| 1 | 47u/35V | CP_EIA-7343-43_Kemet-X | C8 |
| 1 | 22u/35V | CP_EIA-7343-31_Kemet-D | C16 |
| 2 | 100u/10V | CP_EIA-7132-28_AVX-C | C22, C25 |
| 1 | 100u/6.3V | CP_EIA-3216-18_Kemet-A | C27 |
| 3 | 10k | R_0603_1608Metric | R1, R3, R4 |
| 3 | 100k | R_0603_1608Metric | R2, R5, R7 |
| 1 | 180k | R_0603_1608Metric | R6 |
| 2 | 1k5 | R_0603_1608Metric | R8, R12 |
| 1 | 620 | R_0603_1608Metric | R9 |
| 1 | 3k3 | R_0603_1608Metric | R10 |
| 1 | 47 | R_0603_1608Metric | R11 |
| 5 | 10k | R_Cat16-8 | RN1, RN2, RN3, RN4, RN5 |
Usinage design files
The KiCad project lives in the F6ITU/piHPSDR_Controller repository on GitHub; these links point at the commit this page was built from.
Usinage: common questions
How big is the Usinage PCB?
The Usinage measures 256 × 139 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usinage?
84 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usinage design files?
From the F6ITU/piHPSDR_Controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Usinage design in my own project?
The repository has no license, so all rights stay with F6ITU. Use it as a reference, and ask the author before reusing the design.
More boards in piHPSDR_Controller
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372