BusinessCard OG
fab-pie·workshop_kicad_2·PCB_business_card_original/hardware/BusinessCard_OG.kicad_pcb
About the BusinessCard OG PCB
BusinessCard OG is an open source Microchip SAM PCB design by fab-pie, published on GitHub. It is a 4-layer board measuring 33 × 54.3 mm, with 44 components from 10 distinct parts.
Its main chip is the MKE04Z8VFK4, from the Microchip SAM family. By type, the board carries 19 resistors, 18 diodes, 2 connectors, 2 capacitors, 1 IC and 1 battery holder.
Main components on the BusinessCard OG
BusinessCard OG bill of materials (BOM)
44 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MKE04Z8VFK4 | QFN-24_4x4_05_test | U1 |
| 1 | JS202011AQN | JS202011AQN | J1 |
| 1 | DBG | PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | 2468 | BAT_2468 | BT1 |
| 1 | SWITCH | 6mm_tac_switch | S1 |
| 18 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
| 1 | 2.2uF | C_0603_1608Metric | C1 |
| 1 | 0.1uF | C_0603_1608Metric | C2 |
| 18 | 300 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +10 |
| 1 | 10k | R_0603_1608Metric | R19 |
BusinessCard OG design files
The KiCad project lives in the fab-pie/workshop_kicad_2 repository on GitHub; these links point at the commit this page was built from.
BusinessCard OG: common questions
What microcontroller does the BusinessCard OG use?
The BusinessCard OG is built around the MKE04Z8VFK4, from the Microchip SAM family.
How big is the BusinessCard OG PCB?
The BusinessCard OG measures 33 × 54.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BusinessCard OG?
44 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BusinessCard OG design files?
From the fab-pie/workshop_kicad_2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BusinessCard OG design in my own project?
The repository has no license, so all rights stay with fab-pie. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BusinessCard OG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in workshop_kicad_2
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416