Kira

kiibohd·pcb·Kira/Kira.kicad_pcb

Kira PCB layout, top view — open source Microchip SAM board by kiibohd

About the Kira PCB

Kira is an open source Microchip SAM PCB design by kiibohd, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 366.9 × 114.3 mm, with 400 components from 47 distinct parts.

Its main chip is the MK20DX256VLH7, from the Microchip SAM family. Other key parts include the TS3DS10224RUKR and TS3USB30EDGSR. By type, the board carries 129 LEDs, 101 diodes, 100 switches, 34 capacitors, 14 resistors and 3 ICs.

It belongs with the keyboards designs in this gallery.

From the project

PCB and PCB related bits

PCB and PCB Related Bits ========================

In general kicad is used for projects. A project will be explicit if another program is required to view.

Kira, 2019-01-17 K-Type, 2017-11-02 WhiteFox, 2016-06-11 IC60 (Infinity 60% Keyboard, 2016-20-07) ICED Left and Right (Infinity Ergodox, 2015-08-07) DPH (Model F capsense controller using teensy2++)

Kira, from the project README
From the project README

Main components on the Kira

Kira bill of materials (BOM)

400 components, 47 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MK20DX256VLH7
ATSAM4S8CA-CU
U1
1
TS3DS10224RUKR
IS31FL3733
U2
1
TS3USB30EDGSR
IS31FL3733
U3
1
LDL1117
Q1
1
MIC5504
Q2
1
NX3225SA-16.000M-STD-CSR-1
CRYSTAL
X1
1
FLASH_HDR
P1
1
CONN_5
P2
1
CONN_17
P3
6
FIDUCIAL
FID1, FID2, FID3, FID4, FID5, FID6
3
HOLE
HOLE1, HOLE2, HOLE3
1
Jumper
JP1
3
1PIN
MH1, MH2, MH3
98
SW
S1, S2, S3, S4, S5, S6, S7, S8 +90
1
SKQGAKE010
SW
S88
1
TAC_SWITCH
S100
99
RGBLED
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +91
26
RGBLED
LED18, LED21, LED24, LED27, LED30, LED33, LED49, LED65 +18
3
RGBLED
LED126, LED127, LED128
1
LED
LED129
Show 27 more
QtyPartRefs
99
DIODE
D1, D2, D3, D4, D5, D6, D7, D8 +91
2
ESD_BIDIR_1CH
D100, D101
4
JMK105BJ474KV-F
0.47uF
C1, C3, C15, C17
8
EMK105B7104KV-F
0.1uF
C2, C5, C9, C11, C12, C16, C18, C23
1
EEF-CX1D220R
22uF
C4
3
EMK105B7104KV-F
0.47uF
C6, C8, C20
4
JMK105BJ474KV-F
0.1uF
C7, C10, C19, C22
1
JMK105C6225MV-F
0.47uF
C13
1
JMK105C6225MV-F
0.1uF
C14
1
EMK105B7104KV-F
4.7uF
C21
4
0.1uF
C24, C25, C26, C27
1
2.2uF
C28
3
1uF
C29, C31, C32
1
4.7uF
C30
2
18pF
C33, C34
2
RK73B1ETTP330J
1k
R1, R2
1
RK73B1ETTP102J
100k
R3
1
RK73B1ETTP102J
33
R4
1
RK73B1ETTP104J
33
R5
1
RK73B1ETTP104J
100k
R6
1
RK73B1ETTP512J
20k
R7
1
RK73B1ETTP512J
1k
R8
1
RK73B1ETTP133J
1k
R9
2
RK73B1ETTP512J
100
R10, R11
1
RK73B1ETTP102J
1k
R12
1
RK73B1ETTP102J
20k
R13
1
RK73B1ETTP101J
100
R14

Kira design files

The KiCad project lives in the kiibohd/pcb repository on GitHub; these links point at the commit this page was built from.

Kira: common questions

What microcontroller does the Kira use?

The Kira is built around the MK20DX256VLH7, from the Microchip SAM family.

How big is the Kira PCB?

The Kira measures 366.9 × 114.3 mm and is 1.6002 mm thick.

How many components are on the Kira?

400 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kira design files?

From the kiibohd/pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Kira design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which kiibohd chose for the repository.

Can I test firmware for the Kira without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in pcb

Similar boards