Csa ultracpu
fachat·csa_ultracpu·Board/csa_ultracpu.kicad_pcb
About the Csa ultracpu PCB
Csa ultracpu is an open source PCB design by fachat, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 160 × 100.2 mm, with 175 components from 56 distinct parts.
Other key parts include the 74245DW, 74125D, 74LVC1G04, 74138D and MAX3421E. By type, the board carries 77 capacitors, 31 ICs, 31 resistors, 13 jumpers, 10 diodes and 3 crystals.
From the project
The CPU board for a 17MHz Colour-PET clone with modern interfaces
The board is a two-layer Eurocard, i.e. 160mm x 100mm.
The schematics and layout have been created with Cadsoft Eagle. So, here you can find the
- csaultracpu.sch and - csaultracpu.brd files
But, you can still have a look at the schematics and layout using the PNG images created
- csaultracpuv2.0b-sch-1.png Part 1 - CS/A Bus interface - csaultracpuv2.0b-sch-2.png Part 2 - CPLD, CPU, Fast RAM - csaultracpuv2.0b-sch-3.png Part 3 - Power - csaultracpuv2.0b-sch-4.png Part 4 - Video and Audio output - csaultracpuv2.0b-sch-5.png Part 5 - SPI devices (Eth, USB, RTCC, ...) -…
Main components on the Csa ultracpu
Csa ultracpu bill of materials (BOM)
175 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74245DW 74HCT245DW | SO20W | IC2, IC4, IC5 |
| 1 | 74125D 74LVC125 | SO14 | IC3 |
| 1 | 74LVC1G04 741G04DBV | SOT23-5 | IC6 |
| 1 | 74138D 74LVC138 | SO16 | IC7 |
| 1 | MAX3421E | LQFP-32_5x5mm_P0.5mm | IC8 |
| 2 | 74244DW | SO20W | IC13, IC19 |
| 1 | 7414D 74LVC14 | SO14 | IC14 |
| 1 | 74LVC8T245SO24 | SO24L | IC16 |
| 1 | 7406D 74LVC06 | SO14 | IC18 |
| 2 | IS61C5128AL-10TLI | TSOP-II-44_10.16x18.41mm_P0.8mm | U1, U2 |
| 1 | W65C816SPLCC | PLCC44 | U$1 |
| 1 | XC6SLX9-TQG144 | TQFP144 | U$2 |
| 1 | LDI1117 | SOT223 | U$3 |
| 2 | SPIFLASH | DIL08 | U$4, U$18 |
| 7 | PESD5V0L1BA | SOD323 | U$5, U$6, U$8, U$10, U$11, U$14, U$15 |
| 1 | XILINXPROG | FLAT10BOX | U$7 |
| 1 | ETHOLIENC | ETHOLIENC | U$9 |
| 1 | SD-CARD-GRAVI | GRAVITECH-SDCARD | U$12 |
| 1 | MCP79510 | MSOP10 | U$13 |
| 1 | AP2132B-1.2 | PSOP-8-FIXED | U$16 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 32KHZ 32kHz | TC26H | Q2 |
| 1 | 12MHZ 12MHz | HC49_S | Q3 |
| 1 | 1503_09 SJ1-3513N | 1503_09 | X1 |
| 1 | D-SUB15-HDR15RA | HDR15RA | X2 |
| 1 | 710-830207670409 SG-8002CE | Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | X3 |
| 1 | 649-869464713745ELF CSABUS | CSABUS | P1 |
| 1 | DS1813 DS1818 | TO92 | DS1818 |
| 2 | MOUNT-HOLE3.2 | 3,2 | H3, H4 |
| 7 | JP1E | JP1 | JP1, JP2, JP3, JP4, JP6, JP12, JP13 |
| 1 | JP2E | JP2 | JP5 |
| 1 | JP4E | JP4 | JP7 |
| 4 | CONN_01X01_PIN PIN | PIN | JP8, JP9, JP10, JP11 |
| 1 | 31-XX | B3F-31XX | S1 |
| 1 | MCP48X2 | SOIC8 | SN1 |
| 1 | 710-614004190021 USB-A-H | USB-A-H | USB1 |
| 1 | 696-SSL-LX305F4GD LED3MM | LED3MM | LED1 |
| 6 | 1N4148DO35-7 | DO35-7 | D1, D2, D3, D4, D7, D10 |
| 3 | 1N4148DO35-7 1N4148 | D-5 | D5, D6, D8 |
| 1 | 1N4148DO35-7 1N4448 | D-5 | D9 |
| 11 | 1u | C0603 | C1, C4, C9, C14, C49, C54, C55, C56 +3 |
| 47 | 0.1U 0.1u | C0603 | C2, C11, C12, C13, C15, C16, C17, C18 +39 |
| 2 | 810-FG28X5R1H105KRT0 1u | C050-025X075 | C3, C10 |
| 10 | 22U 22u | C0805 | C5, C38, C64, C65, C66, C67, C68, C69 +2 |
| 1 | 47U 47u | E2,5-6 | C6 |
| 2 | 0.1U 100n | C0603 | C7, C8 |
| 4 | 18P 18p | C0603 | C29, C30, C39, C40 |
| 3 | 33 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4 |
| 13 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R6, R9, R10, R11, R12, R16 +5 |
| 2 | 68 | 0204V | R7, R8 |
| 3 | 470 | 0204V | R13, R14, R15 |
| 3 | 1k | 0204V | R18, R19, R20 |
| 1 | 390 | 0207_2V | R22 |
| 2 | 100 | 0204V | R28, R31 |
| 1 | 330 | 0207_2V | R29 |
| 2 | 680 | 0204V | R30, R32 |
| 1 | 10K 10k | RN-9 | RN2 |
Csa ultracpu design files
The KiCad project lives in the fachat/csa_ultracpu repository on GitHub; these links point at the commit this page was built from.
Csa ultracpu: common questions
How big is the Csa ultracpu PCB?
The Csa ultracpu measures 160 × 100.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Csa ultracpu?
175 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Csa ultracpu design files?
From the fachat/csa_ultracpu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Csa ultracpu design in my own project?
Yes, under the terms of its GPL-3.0 license, which fachat chose for the repository.