7 open source boards using the XC6SLX9-TQG144

Real designs built with the XC6SLX9-TQG144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the XC6SLX9-TQG144

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XC6SLX9-TQG144 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCO_3 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 470 nF).
  • The VCCINT pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF).
  • The VCCAUX pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF).
  • The VCCO_1 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 470 nF).
GNDpin 3, 13, 25, 49, 54, 68, 77, 91, 96, 108, 113, 130, 136Connected to: GND 100%
VCCO_3pin 4, 18, 31Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (41), 470 nF (13), 4.7 µF (10)
VCCINTpin 19, 28, 52, 89, 128Connected to: 1.2V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (66), 4.7 µF (19), 470 nF (16)
VCCAUXpin 20, 36, 53, 90, 129Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (62), 4.7 µF (17), 470 nF (17)
PROGRAM_B_2pin 37Connected to: The microcontroller 43%
  • Pull-up to 3.3V on 57% · 4.7 kΩ (3), 10 kΩ (1)
  • Series resistor on 43% · 10 kΩ (2), 4.7 kΩ (1)
IO_L65P_INIT_B_2pin 39Connected to: Signal 100%
  • Pull-up to 3.3V on 43% · 4.7 kΩ (2), 10 kΩ (1)
VCCO_2pin 42, 63Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 86% · 100 nF (25), 4.7 µF (6), 470 nF (6)
IO_L1N_M0_CMPMISO_2pin 69Connected to: Signal 71% · 3.3V 29%
  • Capacitor to GND on 43% · 470 nF (2), 4.7 µF (2), 1 µF (1)
DONE_2pin 71Connected to: Signal 86%
  • Series resistor on 57% · 330 Ω (3), 390 Ω (1), 1 kΩ (1)
CMPCS_B_2pin 72Connected to: Not connected 100%
VCCO_1pin 76, 86, 103Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (32), 470 nF (12), 4.7 µF (10)
VCCO_0pin 122, 125, 135Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (37), 470 nF (12), 4.7 µF (11)

105 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL86jr by MicroCoreLabs, GfxVGA by ddraig68k, ZXUNO.1010 by UzixLS and Cbm micropet by fachat.

The XC6SLX9-TQG144 in open source designs

The gallery holds 7 open source boards using the XC6SLX9-TQG144 from 7 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 183 components.

57% use four copper layers or more, and 86% carry an open source license.

The most starred is MCL86jr by MicroCoreLabs.

Microcontrollers on boards using the XC6SLX9-TQG144

What boards using the XC6SLX9-TQG144 are built for

XC6SLX9-TQG144: common questions

Where can I find a XC6SLX9-TQG144 reference design?

Each of the 7 boards on this page is a real design using the XC6SLX9-TQG144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC6SLX9-TQG144 VCCO_3 pin?

The VCCO_3 pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 7 open source designs using the XC6SLX9-TQG144.

What decoupling capacitors do designs use on the XC6SLX9-TQG144 VCCINT pin?

The VCCINT pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the XC6SLX9-TQG144.

What decoupling capacitors do designs use on the XC6SLX9-TQG144 VCCAUX pin?

The VCCAUX pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the XC6SLX9-TQG144.

What parts are used alongside the XC6SLX9-TQG144?

The 74138D, ETHOLIENC, MCP79510, SD-CARD-GRAVI and SPIFLASH appear in the most repositories here.

Which microcontrollers do boards using the XC6SLX9-TQG144 use?

Most are built on STM32 (2) and ESP8266 (1).

How big is a typical board using the XC6SLX9-TQG144?

The median is 100 × 100 mm, and 43% are two-layer designs.

What is the most popular open source board using the XC6SLX9-TQG144?

By GitHub stars, MCL86jr by MicroCoreLabs, with 532 stars.

Can I simulate one of these boards using the XC6SLX9-TQG144 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part