Pinguino SMD-2550
fandres·pinguino_SMD-2550
About the Pinguino SMD-2550 PCB
Pinguino SMD-2550 is an open source PIC PCB design by fandres, published on GitHub. It is a 2-layer board measuring 25.4 × 25.4 mm, with 17 components from 15 distinct parts.
Its main chip is the PIC18F2550, from the PIC family. By type, the board carries 5 capacitors, 4 connectors, 3 resistors, 2 diodes, 1 IC and 1 crystal.
From the project
PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550
This repository is possibly outdated Este Repositorio se probablemente se encuentra desactualizado
Repository migrated to https://gitlab.com/fandres323/pinguinoSMD-2550 Repositorio migrado a https://gitlab.com/fandres323/pinguinoSMD-2550
PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550
Ref | Qty | Value | Footprint | Package ----- | ---------- | -------- | -------- | -------- C3 | 1| 220nF| CapacitorsSMD:C1206 | 1206 C1 C2 | 2| 22pF| CapacitorsSMD:C1206 | 1206 C4 | 1| 100nF| CapacitorsSMD:C1206 | 1206 C5 | 1| 10uF a 100uF| CapacitorsSMD:celec6.3x5.3 |…

Main components on the Pinguino SMD-2550
Pinguino SMD-2550 bill of materials (BOM)
17 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F2550 | SOJ-28-W | U***1 |
| 1 | 20Mhz | Crystal_SMD_5032_2Pads | Y1 |
| 1 | USB_OTG | USB_Mini-B | P1 |
| 1 | CONN_01X08 | Socket_Strip_Straight_1x08 | P2 |
| 1 | CONN_01X02 | Socket_Strip_Straight_1x02 | P3 |
| 1 | CONN_01X10 | Socket_Strip_Straight_1x10 | P4 |
| 1 | SW Reset | SW_SMD_1181 | SW1 |
| 1 | Run LED | LED_0805 | D1 |
| 1 | Power LED | LED_0805 | D2 |
| 2 | 22pF | C_1206 | C1, C2 |
| 1 | 220nF | C_1206 | C3 |
| 1 | 100nF | C_1206 | C4 |
| 1 | 10uF a 100uF | c_elec_6.3x5.3 | C5 |
| 2 | 470 | R_1206 | R1, R3 |
| 1 | 10k | R_1206 | R2 |
Pinguino SMD-2550 design files
The KiCad project lives in the fandres/pinguino_SMD-2550 repository on GitHub; these links point at the commit this page was built from.
Pinguino SMD-2550: common questions
What microcontroller does the Pinguino SMD-2550 use?
The Pinguino SMD-2550 is built around the PIC18F2550, from the PIC family.
How big is the Pinguino SMD-2550 PCB?
The Pinguino SMD-2550 measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pinguino SMD-2550?
17 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pinguino SMD-2550 design files?
From the fandres/pinguino_SMD-2550 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pinguino SMD-2550 design in my own project?
The repository has no license, so all rights stay with fandres. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pinguino SMD-2550 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in pinguino_SMD-2550
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379