UPinguino 2550 SMD

fandres·pinguino_SMD-2550

UPinguino 2550 SMD PCB layout, top view — open source PIC board by fandres

About the UPinguino 2550 SMD PCB

UPinguino 2550 SMD is an open source PIC PCB design by fandres, published on GitHub. It is a 2-layer board measuring 25.4 × 25.4 mm, with 17 components from 15 distinct parts.

Its main chip is the PIC18F2550, from the PIC family. By type, the board carries 5 capacitors, 4 connectors, 3 resistors, 2 diodes, 1 IC and 1 crystal.

From the project

PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550

This repository is possibly outdated Este Repositorio se probablemente se encuentra desactualizado

Repository migrated to https://gitlab.com/fandres323/pinguinoSMD-2550 Repositorio migrado a https://gitlab.com/fandres323/pinguinoSMD-2550

PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550

Ref | Qty | Value | Footprint | Package ----- | ---------- | -------- | -------- | -------- C3 | 1| 220nF| CapacitorsSMD:C1206 | 1206 C1 C2 | 2| 22pF| CapacitorsSMD:C1206 | 1206 C4 | 1| 100nF| CapacitorsSMD:C1206 | 1206 C5 | 1| 10uF a 100uF| CapacitorsSMD:celec6.3x5.3 |…

UPinguino 2550 SMD, from the project README
From the project README

Main components on the UPinguino 2550 SMD

UPinguino 2550 SMD bill of materials (BOM)

17 components, 15 distinct parts.

QtyPartRefs
1
PIC18F2550
U***1
1
22Mhz
Y1
1
USB
P1
1
CONN_01X08
P2
1
CONN_01X02
P3
1
CONN_01X10
P4
1
SW Reset
SW1
1
Run LED
D1
1
Power LED
D2
2
22pF
C1, C2
1
220nF
C3
1
100nF
C4
1
10uF a 100uF
C5
2
470
R1, R3
1
10k
R2

UPinguino 2550 SMD design files

The KiCad project lives in the fandres/pinguino_SMD-2550 repository on GitHub; these links point at the commit this page was built from.

UPinguino 2550 SMD: common questions

What microcontroller does the UPinguino 2550 SMD use?

The UPinguino 2550 SMD is built around the PIC18F2550, from the PIC family.

How big is the UPinguino 2550 SMD PCB?

The UPinguino 2550 SMD measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UPinguino 2550 SMD?

17 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the UPinguino 2550 SMD design files?

From the fandres/pinguino_SMD-2550 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the UPinguino 2550 SMD design in my own project?

The repository has no license, so all rights stay with fandres. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the UPinguino 2550 SMD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in pinguino_SMD-2550

Similar boards