HardLabs

Fifa-World-Cup-Romance-Test

fanglin0·Fifa-World-Cup-Romance-Test

Fifa-World-Cup-Romance-Test PCB layout, top view — open source AVR/Arduino board by fanglin0

About the Fifa-World-Cup-Romance-Test PCB

Fifa-World-Cup-Romance-Test is an open source AVR/Arduino PCB design by fanglin0, published on GitHub. It is a 2-layer board measuring 40 × 37.5 mm, with 6 components from 6 distinct parts.

Its main chip is the Arduino_Nano_ESP32, from the AVR/Arduino family. By type, the board carries 4 switches, 1 module and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

PLAYABLE HERE https://wokwi.com/projects/471554640484162561

PLAYABLE HERE https://wokwi.com/projects/471554640484162561

Inspired by old school romance compaitbility tests (based on names) I built a old-school style, hand-held console like hardware with Arduino 32 as the display to match the player to their soulmate (from the cast of the 2026 FIFA world cup players trending all over social media). With a series of personality questions the user will be matched to their perfect partner from the world cup, and be able to navigate and reset through answer choices with the buttons.

Fifa-World-Cup-Romance-Test, from the project README
From the project README

Main components on the Fifa-World-Cup-Romance-Test

Arduino_Nano_ESP32

Fifa-World-Cup-Romance-Test bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano_ESP32
Arduino
A1
1
OLED
Adafruit
J3
1
LEFT
Adafruit
SW1
1
OK
Adafruit
SW2
1
RIGHT
Adafruit
SW3
1
RESET
Adafruit
SW4

Fifa-World-Cup-Romance-Test design files

The KiCad project lives in the fanglin0/Fifa-World-Cup-Romance-Test repository on GitHub; these links point at the commit this page was built from.

Fifa-World-Cup-Romance-Test: common questions

What microcontroller does the Fifa-World-Cup-Romance-Test use?

The Fifa-World-Cup-Romance-Test is built around the Arduino_Nano_ESP32, from the AVR/Arduino family.

How big is the Fifa-World-Cup-Romance-Test PCB?

The Fifa-World-Cup-Romance-Test measures 40 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fifa-World-Cup-Romance-Test?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fifa-World-Cup-Romance-Test design files?

From the fanglin0/Fifa-World-Cup-Romance-Test repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fifa-World-Cup-Romance-Test design in my own project?

The repository has no license, so all rights stay with fanglin0. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fifa-World-Cup-Romance-Test without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards