Knuckles wireless
fcoury·knuckles·pcbs/knuckles_wireless.kicad_pcb
About the Knuckles wireless PCB
Knuckles wireless is an open source PCB design by fcoury, published on GitHub under the MIT license. It is a 2-layer board measuring 130.3 × 107.9 mm, with 118 components from 6 distinct parts.
By type, the board carries 54 switches, 54 diodes and 1 connector.
It belongs with the keyboards, iot & wireless and wearables designs in this gallery.
From the project
An open-source, wireless column-staggered ergonomic keyboard.
There are a lot of split keyboards out there, but most of the ones that piqued my interest don't have a number row, and I really like having one. I also wanted a slim ergo split that feels somewhat like a Magic Keyboard. Knuckles is my attempt at both.
Each half has 27 keys: a column-staggered 6×4 grid that includes the number row, plus a three-key thumb fan. It uses Kailh PG1316S low-profile switches on reversible footprints, a nice!nano controller, a JST-PH battery connector, and a power switch. The controller area also fits the HolyKeebs TPS43 touchpad module.

Knuckles wireless bill of materials (BOM)
118 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | battery_connector_jst_ph_2 | JST1 |
| 7 | — | mounting_hole_npth | MH1, MH2, MH3, MH4, MH5, MH6, MH7 |
| 1 | — | power_switch_smd_side | PWR1 |
| 1 | — | reset_switch_smd_side | RST1 |
| 54 | — | CPG1316S01D02 | S1, S2, S3, S4, S5, S6, S7, S8 +46 |
| 54 | — | diode_tht_sod123 | D1, D2, D3, D4, D5, D6, D7, D8 +46 |
Knuckles wireless design files
The KiCad project lives in the fcoury/knuckles repository on GitHub; these links point at the commit this page was built from.
Knuckles wireless: common questions
How big is the Knuckles wireless PCB?
The Knuckles wireless measures 130.3 × 107.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Knuckles wireless?
118 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Knuckles wireless design files?
From the fcoury/knuckles repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Knuckles wireless design in my own project?
Yes, under the terms of its MIT license, which fcoury chose for the repository.
More boards in knuckles
Knuckles
fcoury
130.3 × 107.9 mm150 parts2LMIT6Knuckles wireless autorouted
fcoury
130.3 × 107.9 mm118 parts2LMIT6Nordic nRF
Knuckles integrated right
fcoury
137.3 × 113.5 mm100 parts4LMIT6Nordic nRF
Knuckles integrated left
fcoury
130.3 × 107.9 mm99 parts4LMIT6Nordic nRF
Knuckles controller
fcoury
45 × 55 mm41 parts2LMIT6Frontplate
fcoury
129.8 × 107.9 mm5 parts2LMIT6Backplate
fcoury
130.3 × 107.9 mm5 parts2LMIT6
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k