Knuckles wireless autorouted

fcoury·knuckles·manufacturing/2026-10-18-knuckles-wireless-18.5mm/knuckles_wireless_autorouted.kicad_pcb

Knuckles wireless autorouted PCB layout, top view — open source board by fcoury

About the Knuckles wireless autorouted PCB

Knuckles wireless autorouted is an open source PCB design by fcoury, published on GitHub under the MIT license. It is a 2-layer board measuring 130.3 × 107.9 mm, with 118 components from 6 distinct parts.

By type, the board carries 54 switches, 54 diodes and 1 connector.

It belongs with the iot & wireless and keyboards designs in this gallery.

From the project

An open-source, wireless column-staggered ergonomic keyboard.

This directory preserves the exact saved autorouted PCB and Gerber ZIP used for the JLCPCB order reported on 2026-10-18. Keep these files unchanged; archive later orders in a new dated directory.

Upload knuckleswirelessautorouted.zip to reproduce this manufacturing revision. The board uses 18.5 mm key spacing, two copper layers, and a 1.6 mm board thickness. These are the design settings; the JLCPCB order number and selected order options were not recorded here.

Knuckles wireless autorouted bill of materials (BOM)

118 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
—
JST1
7
—
MH1, MH2, MH3, MH4, MH5, MH6, MH7
1
—
PWR1
1
—
RST1
54
—
S1, S2, S3, S4, S5, S6, S7, S8 +46
54
—
D1, D2, D3, D4, D5, D6, D7, D8 +46

Knuckles wireless autorouted design files

The KiCad project lives in the fcoury/knuckles repository on GitHub; these links point at the commit this page was built from.

Knuckles wireless autorouted: common questions

How big is the Knuckles wireless autorouted PCB?

The Knuckles wireless autorouted measures 130.3 × 107.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Knuckles wireless autorouted?

118 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Knuckles wireless autorouted design files?

From the fcoury/knuckles repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Knuckles wireless autorouted design in my own project?

Yes, under the terms of its MIT license, which fcoury chose for the repository.

More boards in knuckles

Similar boards