Knuckles controller
fcoury·knuckles·hardware/integrated-controller/output/knuckles_controller.kicad_pcb
About the Knuckles controller PCB
Knuckles controller is an open source Nordic nRF PCB design by fcoury, published on GitHub under the MIT license. It is a 2-layer board measuring 45 × 55 mm, with 41 components from 21 distinct parts.
Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the BQ25186DLHR, TPS63031DSKR and USBLC6-2SC6. By type, the board carries 16 resistors, 12 capacitors, 4 ICs, 3 transistors, 3 connectors and 2 switches.
It belongs with the iot & wireless, keyboards and power & battery designs in this gallery.
From the project
An open-source, wireless column-staggered ergonomic keyboard.
This revision integrates an nRF52840 radio module, USB-C, battery charging and 3.3 V regulation into dedicated left and right keyboard PCBs. It retains 27 keys per half and the right-hand TPS43. The default spacing is 18.5 mm; 19.5 mm is generated from the same sources.
These are engineering prototypes and have not been manufactured or tested. The firmware artifacts are experimental builds for the new circuit. Do not flash them onto the working nice!nano keyboards or order these PCB files.
Main components on the Knuckles controller
Knuckles controller bill of materials (BOM)
41 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDBT50Q-1MV2 | Raytac_MDBT50Q | U1 |
| 1 | BQ25186DLHR | TI_WSON_DLH0010A | U2 |
| 1 | TPS63031DSKR | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 2 | 2N7002 | SOT-23 | Q2, Q3 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C295747 S2B-PH-SM4-TB(LF)(SN) | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | C160404 SM04B-SRSS-TB(LF)(SN) | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | SSSS811101 | SSSS811101 | SW1 |
| 1 | SKRPANE010 | SKRPANE010 | SW2 |
| 1 | SWPA3015S1R5NT 1.5uH SWPA3015S1R5NT | L_Sunlord_SWPA3015S | L1 |
| 4 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C1, C9, C12, C13 |
| 5 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C2, C6, C8, C10, C11 |
| 1 | CL10A475KO8NNNC 4.7uF | C_0603_1608Metric | C3 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C4, C5 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R1, R2 |
| 7 | 0603WAF1002T5E 10k | R_0603_1608Metric | R3, R6, R7, R8, R9, R15, R16 |
| 2 | 0603WAF1003T5E 100k | R_0603_1608Metric | R10, R11 |
| 3 | 0603WAF1004T5E 1M | R_0603_1608Metric | R13, R14, R17 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0603WAF270JT5E 27R | R_0603_1608Metric | R18, R19 |
Knuckles controller design files
The KiCad project lives in the fcoury/knuckles repository on GitHub; these links point at the commit this page was built from.
Knuckles controller: common questions
What microcontroller does the Knuckles controller use?
The Knuckles controller is built around the MDBT50Q-1MV2, from the Nordic nRF family.
How big is the Knuckles controller PCB?
The Knuckles controller measures 45 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Knuckles controller?
41 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Knuckles controller design files?
From the fcoury/knuckles repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Knuckles controller design in my own project?
Yes, under the terms of its MIT license, which fcoury chose for the repository.
Can I test firmware for the Knuckles controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in knuckles
Knuckles
fcoury
130.3 × 107.9 mm150 parts2LMIT6Knuckles wireless
fcoury
130.3 × 107.9 mm118 parts2LMIT6Knuckles wireless autorouted
fcoury
130.3 × 107.9 mm118 parts2LMIT6Nordic nRF
Knuckles integrated right
fcoury
137.3 × 113.5 mm100 parts4LMIT6Nordic nRF
Knuckles integrated left
fcoury
130.3 × 107.9 mm99 parts4LMIT6Frontplate
fcoury
129.8 × 107.9 mm5 parts2LMIT6Backplate
fcoury
130.3 × 107.9 mm5 parts2LMIT6
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381