Knuckles integrated right

fcoury·knuckles·hardware/integrated-controller/output/integrated/19.5/knuckles_integrated_right.kicad_pcb

Knuckles integrated right PCB layout, top view — open source Nordic nRF board by fcoury

About the Knuckles integrated right PCB

Knuckles integrated right is an open source Nordic nRF PCB design by fcoury, published on GitHub under the MIT license. It is a 4-layer board measuring 137.3 × 113.5 mm, with 100 components from 24 distinct parts.

Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the BQ25186DLHR, TPS63031DSKR and USBLC6-2SC6. By type, the board carries 29 switches, 27 diodes, 16 resistors, 12 capacitors, 4 ICs and 3 transistors.

It belongs with the iot & wireless, keyboards and power & battery designs in this gallery.

From the project

An open-source, wireless column-staggered ergonomic keyboard.

This revision integrates an nRF52840 radio module, USB-C, battery charging and 3.3 V regulation into dedicated left and right keyboard PCBs. It retains 27 keys per half and the right-hand TPS43. The default spacing is 18.5 mm; 19.5 mm is generated from the same sources.

These are engineering prototypes and have not been manufactured or tested. The firmware artifacts are experimental builds for the new circuit. Do not flash them onto the working nice!nano keyboards or order these PCB files.

Main components on the Knuckles integrated right

Knuckles integrated right bill of materials (BOM)

100 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MDBT50Q-1MV2
U1
1
BQ25186DLHR
U2
1
TPS63031DSKR
U3
1
USBLC6-2SC6
U4
1
AO3401A
Q1
2
2N7002
Q2, Q3
1
TYPE-C-31-M-12
J1
1
C295747
S2B-PH-SM4-TB(LF)(SN)
J2
1
C160404
SM04B-SRSS-TB(LF)(SN)
J3
5
—
MH3, MH4, MH5, MH6, MH7
27
—
S28, S29, S30, S31, S32, S33, S34, S35 +19
1
SSSS811101
SW1
1
SKRPANE010
SW2
27
—
D28, D29, D30, D31, D32, D33, D34, D35 +19
1
SWPA3015S1R5NT
1.5uH SWPA3015S1R5NT
L1
4
CC0603KRX7R9BB104
100nF
C1, C9, C12, C13
5
CL21A226MAQNNNE
22uF
C2, C6, C8, C10, C11
1
CL10A475KO8NNNC
4.7uF
C3
2
2.2UF
2.2uF
C4, C5
2
0603WAF5101T5E
5.1k
R1, R2
Show 4 more
QtyPartRefs
7
0603WAF1002T5E
10k
R3, R6, R7, R8, R9, R15, R16
2
0603WAF1003T5E
100k
R10, R11
3
0603WAF1004T5E
1M
R13, R14, R17
2
0603WAF270JT5E
27R
R18, R19

Knuckles integrated right design files

The KiCad project lives in the fcoury/knuckles repository on GitHub; these links point at the commit this page was built from.

Knuckles integrated right: common questions

What microcontroller does the Knuckles integrated right use?

The Knuckles integrated right is built around the MDBT50Q-1MV2, from the Nordic nRF family.

How big is the Knuckles integrated right PCB?

The Knuckles integrated right measures 137.3 × 113.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Knuckles integrated right?

100 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Knuckles integrated right design files?

From the fcoury/knuckles repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Knuckles integrated right design in my own project?

Yes, under the terms of its MIT license, which fcoury chose for the repository.

Can I test firmware for the Knuckles integrated right without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in knuckles

Similar boards