RGT6 core module
FE3C61AD329B·RGT6·RGT6_core_module/RGT6_core_module.kicad_pcb
About the RGT6 core module
RGT6 core module is an open source STM32 PCB design by FE3C61AD329B, published on GitHub. It is a 2-layer board measuring 51.8 × 20.3 mm, with 62 components from 31 distinct parts.
Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the MCP1703A-4002_SOT23. By type, the board carries 15 resistors, 11 capacitors, 2 ICs, 2 crystals, 1 switch and 1 battery holder.
From the project
A minimal system runs MicroPython using STM32F405RGT6
A minimal system runs MicroPython using STM32F405RGT6
Designed in KiCAD, free to use in any application.
PCB preview in KiCAD Actual PCB And the size of its stencil

Main components on the RGT6 core module
RGT6 core module bill of materials (BOM)
62 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGTx | LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | MCP1703A-4002_SOT23 | SOT-23 | U2 |
| 1 | 8Mhz | Crystal_SMD_5032-2pin_5.0x3.2mm | Y1 |
| 1 | 32.768khz | Crystal_SMD_2012-2pin_2.0x1.2mm | Y2 |
| 5 | CONN_01X01_FEMALE | SolderWirePad_single_0-8mmDrill | 3v3, scl1, scl2, sda1, sda2 |
| 10 | CONN_01X01_FEMALE | testpoint | PB8, PB9, PB12, sd1, sd2, sd3, sd4, sd5 +2 |
| 3 | jtag | testpoint | PB13, PB14, PB15 |
| 4 | ADCs | testpoint | PC0, PC1, PC2, PC3 |
| 1 | do not use | testpoint | PC13 |
| 1 | uart4 RX | SolderWirePad_single_0-8mmDrill | RX1 |
| 1 | usart RX | SolderWirePad_single_0-8mmDrill | RX2 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 1 | uart4 TX | SolderWirePad_single_0-8mmDrill | TX1 |
| 1 | usart TX | SolderWirePad_single_0-8mmDrill | TX2 |
| 1 | CONN_01X01_FEMALE | SolderWirePad_single_0-8mmDrill | bt0 |
| 1 | WS2812B | ws2812_big-pad | LED1 -> |
| 1 | DIODE | D_0603 | D1<- |
| 1 | 1k | L_0603 | L1 |
| 2 | 2p2 | C_0603 | C1, C2 |
| 2 | 18p | C_0603 | C3, C4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2u2 | C_0603 | C5, C6 |
| 1 | 4u7 | C_0603 | C7 |
| 1 | 100n | C_0603 | C8 |
| 1 | 1uF | C_0603 | C9 |
| 2 | 100nF | C_0603 | C10, C11 |
| 2 | 300 | R_0603 | R1, R14 |
| 2 | 100k | R_0603 | R2, R7 |
| 2 | 560 | R_0603 | R3, R4 |
| 2 | 22 | R_0603 | R5, R6 |
| 6 | 4k7 | R_0603 | R8, R9, R10, R11, R12, R15 |
| 1 | 220 | R_0603_short | R13 |
RGT6 core module design files
The KiCad project lives in the FE3C61AD329B/RGT6 repository on GitHub; these links point at the commit this page was built from.
RGT6 core module: common questions
What microcontroller does the RGT6 core module use?
The RGT6 core module is built around the STM32F405RGTx, from the STM32 family.
How big is the RGT6 core module?
The RGT6 core module measures 51.8 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RGT6 core module?
62 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the RGT6 core module design files?
From the FE3C61AD329B/RGT6 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RGT6 core module design in my own project?
The repository has no license, so all rights stay with FE3C61AD329B. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RGT6 core module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in RGT6
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k