Canfdshield

feaser·canfdshield·hardware/canfdshield.kicad_pcb

About the Canfdshield PCB

Canfdshield is an open source PCB design by feaser, published on GitHub under the MIT license. It is a 4-layer board measuring 53.9 × 53.3 mm, with 14 components from 13 distinct parts.

Other key parts include the TCAN3413DR. By type, the board carries 5 connectors, 3 capacitors, 3 resistors, 1 IC, 1 jumper and 1 diode.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Arduino shield with 3.3V CAN FD Transceiver for STM32 Nucleo boards

With CanFdShield you can connect your ST Nucleo board to a CAN bus. This assumes that the STM32 microcontroller features a CAN or CAN FD controller with CAN-RX on connector pin D15 and CAN-TX on D14.

The Texas Instruments TCAN3413DR CAN FD transceiver was integrated into the design. This 3.3V CAN transceiver works with classical CAN and optimized CAN FD performance at 2, 5, and 8 Mbps.

Canfdshield, from the project README — From the project README

Main components on the Canfdshield

TCAN3413DR

Canfdshield bill of materials (BOM)

14 components, 13 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	TCAN3413DR	SOIC-8_3.9x4.9mm_P1.27mm	U1
1	C6332201 Power	PinHeader_1x08_P2.54mm_Vertical	J1
1	C6332199 Analog	PinHeader_1x06_P2.54mm_Vertical	J2
1	C6332203 Digital/PWM	PinHeader_1x10_P2.54mm_Vertical	J3
1	C6332201 Digital/PWM	PinHeader_1x08_P2.54mm_Vertical	J4
1	C2691448 CAN XCVR	PinHeader_1x04_P2.54mm_Vertical	J6
1	Rterm	SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm	JP1
1	C2297 Green	LED_0805_2012Metric	D3
1	4.7UF 4.7uF	C_0603_1608Metric	C1
2	100NF 100nF	C_0402_1005Metric	C2, C3
1	10K	R_0402_1005Metric	R1
1	120	R_0805_2012Metric	R2
1	510	R_0603_1608Metric	R3

Canfdshield design files

The KiCad project lives in the feaser/canfdshield repository on GitHub; these links point at the commit this page was built from.

Layouthardware/canfdshield.kicad_pcb
Schematichardware/canfdshield.kicad_sch
BOMhardware/assembly/canfdshield-BOM.csv

Canfdshield: common questions

How big is the Canfdshield PCB?

The Canfdshield measures 53.9 × 53.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Canfdshield?

14 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Canfdshield design files?

From the feaser/canfdshield repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Canfdshield design in my own project?

Yes, under the terms of its MIT license, which feaser chose for the repository.