Rainpoint local
fholgado·rainpoint-local·hardware/rainpoint_carrier/kicad/rainpoint_carrier.kicad_pcb
About the Rainpoint local PCB
Rainpoint local is an open source ESP32 PCB design by fholgado, published on GitHub under the MIT license. It is a 2-layer board measuring 68 × 66 mm, with 5 components from 5 distinct parts.
Its main chip is the PPTC151LFBN-RC, from the ESP32 family. By type, the board carries 3 connectors and 2 capacitors.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Experimental local-first RainPoint irrigation integration for Home Assistant
This directory defines the first passive carrier PCB for the validated RainPoint radio-node prototype. It converts the working Dupont-wire build into a socketed assembly without replacing either module.
Revision A is a fabrication-ready engineering prototype. Its electrical mapping follows the working bridge exactly. The carrier footprint follows the physically verified 30-pin ELEGOO ESP-WROOM-32 USB-C board: two 15-pin rows at 2.54 mm pitch, anchored toward the USB end. Before ordering, print the generated Letter-size fit check PDF at Actual Size / 100%, place the actual ESP32 and CC1101…
Rainpoint local bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PPTC151LFBN-RC ESP32_Left_1x15 Sullins Connector Solutions | ESP32_Left_1x15 | J1 |
| 1 | PPTC151LFBN-RC ESP32_Right_1x15 Sullins Connector Solutions | ESP32_Right_1x15 | J2 |
| 1 | PPTC042LFBN-RC CC1101_2x4 Sullins Connector Solutions | CC1101_2x4 | J3 |
| 1 | C0805C104K5RACTU 100nF KEMET | C_0805_2012Metric | C1 |
| 1 | GRM21BR61A106KE19L 10uF Murata Electronics | C_0805_2012Metric | C2 |
Rainpoint local design files
The KiCad project lives in the fholgado/rainpoint-local repository on GitHub; these links point at the commit this page was built from.
Rainpoint local: common questions
What microcontroller does the Rainpoint local use?
The Rainpoint local is built around the PPTC151LFBN-RC, from the ESP32 family.
How big is the Rainpoint local PCB?
The Rainpoint local measures 68 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rainpoint local?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rainpoint local design files?
From the fholgado/rainpoint-local repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rainpoint local design in my own project?
Yes, under the terms of its MIT license, which fholgado chose for the repository.
Can I test firmware for the Rainpoint local without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k