Waveform generator rev1
About the Waveform generator rev1 PCB
Waveform generator rev1 is an open source PCB design by Fifty-Nine, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 50.8 × 50.8 mm, with 49 components from 26 distinct parts.
Other key parts include the 497-1242-1, 93LC46BT-I/OT, AD9837BCPZ-RL7 and 768-1024-1. By type, the board carries 23 capacitors, 10 resistors, 4 ICs, 4 connectors, 3 diodes and 2 crystals.
From the project
Open source implementation of a USB-controlled function generator
This is an implementation of a USB-controlled Analog Devices AD9837-based function generator that can generate sine, triangle and square waves up to around 200 kHz or so, 1 MHz if the output filtering capacitor is removed (although the quantization of the ADC starts to become apparent around 500 kHz).
Connectors, Jumpers and Indicators ==================================
Main components on the Waveform generator rev1
Waveform generator rev1 bill of materials (BOM)
49 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 497-1242-1 LD1117S33TR | SOT-223 | U1 |
| 1 | 93LC46BT-I/OT 93LC46BT | SOT-23-6_Handsoldering | U2 |
| 1 | AD9837BCPZ-RL7 AD9837 | AD9837 | U3 |
| 1 | 768-1024-1 FT2232H | LQFP-64_10x10mm_Pitch0.5mm | U4 |
| 1 | 535-10634-1 12MHz | Crystal_SMD_5032-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 1664-1111-1 OXETGCJANF | Oscillator_SMD_Abracon_ASE-4pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | 609-4618-1 USB_B | USB_Micro-B | J1 |
| 1 | A97594 EXT_CLK | SMA_THT_Jack_Straight | J2 |
| 1 | A97594 VOUT | SMA_THT_Jack_Straight | J3 |
| 1 | S2011EC-40 CONN_02X09 | Pin_Header_Straight_2x09_Pitch2.54mm | J4 |
| 1 | CLK_SELECT | Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 3 | 350-2900-ND, LED_Small | LED_0805 | D1, D2, D3 |
| 2 | 490-1054-1 800m | L_0805_HandSoldering | L1, L2 |
| 2 | 478-10518-1 27p | C_0805_HandSoldering | C1, C2 |
| 7 | 478-1395-1 100n | C_0805_HandSoldering | C3, C5, C16, C18, C20, C22, C23 |
| 2 | 478-10568-1 10u | C_0805_HandSoldering | C4, C15 |
| 1 | 478-1414-1 3.3u | C_0805_HandSoldering | C6 |
| 8 | 100n | C_0805_HandSoldering | C7, C8, C9, C10, C11, C12, C13, C14 |
| 1 | 478-10447-1 10n | C_0805_HandSoldering | C17 |
| 2 | 478-1415-1 4.7u | C_0805_HandSoldering | C19, C21 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FC0603-50BF 50 | R_0603_HandSoldering | R1 |
| 3 | P470AD 470 | R_0805_HandSoldering | R2, R3, R4 |
| 3 | P10KAD 10k | R_0805_HandSoldering | R5, R6, R7 |
| 1 | P2.2KAD 2.2k | R_0805_HandSoldering | R8 |
| 1 | P1.0KAD 1k | R_0805_HandSoldering | R9 |
| 1 | P12KAD 12k | R_0805_HandSoldering | R10 |
Waveform generator rev1 design files
The KiCad project lives in the Fifty-Nine/wavegen repository on GitHub; these links point at the commit this page was built from.
Waveform generator rev1: common questions
How big is the Waveform generator rev1 PCB?
The Waveform generator rev1 measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Waveform generator rev1?
49 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Waveform generator rev1 design files?
From the Fifty-Nine/wavegen repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Waveform generator rev1 design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Fifty-Nine chose for the repository.
More boards in wavegen
Earlier revisions in the repo: waveform-generator