67 open source boards using the LD1117S33TR
Real designs built with the LD1117S33TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MMDVM HS Dual Hat
phl0
65 × 56 mm117 parts2LNo license216ESP8266
Wifi PB panel
AntonioMR
100 × 100 mm162 parts2LNo license29STM32
MMDVM RPT Hat
mathisschmieder
65 × 56 mm103 parts2LNo license27Diff drive mapping robot
rayvburn
136 × 128.5 mm95 parts2LNo license27Prototype1
nmikstas
111.8 × 80.8 mm164 parts4LNo license20STM32
STM32XP
MechatronixLab
99.1 × 68.6 mm166 parts4LCERN-OHL-P-2.014Microchip SAM
ArduinoDueClone
digibird1
160 × 100 mm75 parts2LNo license14NXP
Motor high current sensors
jonblissett
182.8 × 54 mm221 parts2LGPL-3.011AVR/Arduino
GP22 RF Photon Correllation
charlesbaynham
100 × 100 mm116 parts4LNo license11STM32
Hard wookey motherboard
wookey-project
43 × 66 mm68 parts4LCERN-OHL-1.210Mbed ce ci shield v2
mbed-ce
104.5 × 91 mm164 parts4LCERN-OHL-P-2.07ESP32
Psu ext hardware
PSU-Ext-Org
100 × 50 mm110 parts4LCERN-OHL-S-2.07STM32
Scorpion card pub
psk7
83.1 × 45.4 mm88 parts2LMIT7Elec3607-lab
phwl
55.9 × 84.9 mm65 parts4LNo license7ESP32
MiniGun
charcole
111.8 × 37.5 mm29 parts2LCC-BY-NC-4.07STM32
Motorcontroller hw
nerdmaennchen
50 × 40 mm67 parts2LMIT6STM32
Shim
dotcypress
40.4 × 22.5 mm26 parts2LApache-2.06ESP32
Electricload
hnz1102
185 × 98 mm71 parts2LNo license5RP2040/RP2350
Volumer
ThePurpleOne
90 × 80 mm38 parts4LMIT5Rev3
Fifty-Nine
55.9 × 76.2 mm98 parts4LCERN-OHL-1.24ESP32
Uamsense
GNB-UAM
69.7 × 95.9 mm72 parts2LGPL-3.04STM32
Rfc tackle sensor
Celnardur
47 × 59.7 mm66 parts4LMIT3Radiohat 2.0 Preliminary (not a Hat)
mpvano
85 × 56 mm153 parts4LMIT2STM32
KbxBinaryClock.v4
kbx81
127 × 114.3 mm128 parts2LNo license2ESP8266
MatrixClock
middelink
160 × 32 mm66 parts2LMIT2AVR/Arduino
Salp board
aeiou642
64.8 × 58.7 mm57 parts4LNo license2ESP8266
ESP multi board
CRM-UAM
82.2 × 47.9 mm43 parts2LNo license2STM32
Roboterarm1
tobiasbaas
62.4 × 94.3 mm216 parts4LNo license1STM32
Hard wookey jtag
wookey-project
38.1 × 17.8 mm29 parts4LCERN-OHL-1.21AVR/Arduino
Diu
0x007E
143.5 × 68.6 mm253 parts2LCC-BY-NC-4.00STM32
EMG-HW-MainBoard
N-Pulse
95.3 × 62 mm123 parts4LCC-BY-4.00STM32
STM32F103 Telemetry V01
andreabadan
96 × 96 mm109 parts4LGPL-3.00STM32
Placement
Xenoah
98 × 98 mm103 parts4LMIT0STM32
Ivegotdapower elec
PhenixRobotik
87 × 70 mm82 parts2LNo license0ESP8266
PeterThePowerMeter
CtrlAltJon
57.5 × 79 mm76 parts2LMIT0NXP
PBLE01 CO DESIGN DE PRODUTOS ELETRONICOS
LucasToledo16
79 × 75.8 mm75 parts2LNo license0
How designs wire the LD1117S33TR
Read from the KiCad layouts of 53 open source designs, one per repository: what each pin of the LD1117S33TR connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 44 of 53 designs, most often 100 nF (then 10 µF).
- The VO pin has a decoupling capacitor on 34 of 53 designs, most often 10 µF (then 100 nF).
- The THERMAL pin is left unconnected on 15 of 17 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 83% · a signal 17% |
|
| VIpin 3 | Connected to: 5V 85% · a signal 15% |
|
| THERMALpin 4 | Connected to: Not connected 88% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Radioberry juice by pa3gsb, MMDVM HS Dual Hat by phl0, Wifi PB by AntonioMR and MMDVM RPT Hat by mathisschmieder.
The LD1117S33TR in open source designs
The gallery holds 67 open source boards using the LD1117S33TR from 53 GitHub repositories; a typical one measures about 74.7 × 62 mm and carries around 75 components.
60% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is Radioberry juice by pa3gsb.
Parts used alongside the LD1117S33TR
Microcontrollers on boards using the LD1117S33TR
What boards using the LD1117S33TR are built for
LD1117S33TR: common questions
Where can I find a LD1117S33TR reference design?
Each of the 67 boards on this page is a real design using the LD1117S33TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD1117S33TR VI pin?
The VI pin has a decoupling capacitor on 44 of 53 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 53 open source designs using the LD1117S33TR.
What decoupling capacitors do designs use on the LD1117S33TR VO pin?
The VO pin has a decoupling capacitor on 34 of 53 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 53 open source designs using the LD1117S33TR.
How is the LD1117S33TR THERMAL pin connected?
The THERMAL pin is left unconnected on 15 of 17 designs. Counted from the KiCad layouts of 53 open source designs using the LD1117S33TR.
What parts are used alongside the LD1117S33TR?
The USBLC6-2SC6, FT232RL, LD1117S50TR, 24LC512 and 93LC56B appear in the most repositories here.
Which microcontrollers do boards using the LD1117S33TR use?
Most are built on STM32 (25), ESP8266 (7), ESP32 (6) and AVR/Arduino (4).
How big is a typical board using the LD1117S33TR?
The median is 74.7 × 62 mm, and 60% are two-layer designs.
What is the most popular open source board using the LD1117S33TR?
By GitHub stars, Radioberry juice by pa3gsb, with 675 stars.
Can I simulate one of these boards using the LD1117S33TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.