Cutiepie nRF52840-uniform stagger hotswap

flamwenco·cutiepie·Baconspoon_Hotswap_and_BLE_PCBs/ble-uniform-stagger-hotswap-solder/cutiepie-nRF52840-uniform-stagger-hotswap-pcb.kicad_pcb

Cutiepie nRF52840-uniform stagger hotswap PCB layout, top view — open source board by flamwenco

About the Cutiepie nRF52840-uniform stagger hotswap PCB

Cutiepie nRF52840-uniform stagger hotswap is an open source PCB design by flamwenco, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 200 × 81 mm, with 103 components from 25 distinct parts.

Other key parts include the W25Q128JVS and XC6206P332MR. By type, the board carries 38 diodes, 11 resistors, 6 capacitors, 3 connectors, 2 ICs and 2 switches.

From the project

A funky little 10.5u with dual 1.75u spacebars.

Included in this directory are several PCB and plate files for Cutiepie by Flamwenco. Pay close attention to compatibility notes. Most of these PCB's and plates are NOT compatible with the original 2x1.75u and 3u case tops, or the original non-symmetrical case bottom. Choose a plate option that will support your desired layout, including stabilizers.

UPDATE: Added models for thick plates at /BaconspoonHotswapandBLEPCBs/thick-plate-models. There are separate models for standard row stagger, uniform row stagger, and ortho. All three plates are for the 2x2u or 4u spacebar layout only. Stagger…

Main components on the Cutiepie nRF52840-uniform stagger hotswap

W25Q128JVS XC6206P332MR

Cutiepie nRF52840-uniform stagger hotswap bill of materials (BOM)

103 components, 25 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	W25Q128JVS XC6206P332MRn	SOT-23-3	U2
1	XC6206P332MR BQ24075RGT	VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm	U3
1	2N7002	SOT-23	Q1
1	SM04B	JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal	J1
1	Battery	JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal	J2
1	Conn_02x03_Counter_Clockwise	PinHeader_2x03_P2.54mm_Vertical	J5
1	Cutiepie Tab	cutiepie-tab	H1
31	CPG151101S11-16 CPG151101S11	MXOnly-1U-Hotswap	MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +23
2	CPG151101S11-16 CPG151101S11	MXOnly-1.5U-Hotswap	MX10, MX21
2	CPG151101S11-16 CPG151101S11	MXOnly-1.25U-Hotswap	MX11, MX20
3	CPG151101S11-16 CPG151101S11	MXOnly-2U-Hotswap-ReversedStabilizers	MX34, MX35, MX36
1	CPG151101S11	MXOnly-1U-Hotswap	MX39
1	SW_SPDT	SW_SPDT_PCM12	SW1
1	RESET	SW_SPST_TL3342	SW2
38	1N4148W	D_SOD-123	D1, D2, D3, D4, D5, D6, D7, D8 +30
2	1uF	C_0402_1005Metric	C1, C2
1	100nF	C_0402_1005Metric	C3
3	4u7	C_0402_1005Metric	C4, C5, C6
1	47k	R_0402_1005Metric	R1
2	10k	R_0402_1005Metric	R2, R9

Show 5 more

Qty	Part	Footprint	Refs
1	100k	R_0402_1005Metric	R3
4	1k5	R_0402_1005Metric	R4, R5, R6, R7
1	100	R_0402_1005Metric	R8
1	806kΩ	R_0402_1005Metric	R10
1	2MΩ	R_0402_1005Metric	R11

Cutiepie nRF52840-uniform stagger hotswap design files

The KiCad project lives in the flamwenco/cutiepie repository on GitHub; these links point at the commit this page was built from.

Cutiepie nRF52840-uniform stagger hotswap: common questions

How big is the Cutiepie nRF52840-uniform stagger hotswap PCB?

The Cutiepie nRF52840-uniform stagger hotswap measures 200 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cutiepie nRF52840-uniform stagger hotswap?

103 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cutiepie nRF52840-uniform stagger hotswap design files?

From the flamwenco/cutiepie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cutiepie nRF52840-uniform stagger hotswap design in my own project?

Yes, under the terms of its GPL-3.0 license, which flamwenco chose for the repository.

More boards in cutiepie