HardLabs

Cutiepie2040-ortho hotswap solder

flamwenco·cutiepie·Baconspoon_Hotswap_and_BLE_PCBs/ortho-hotswap-solder-pcb/cutiepie2040-ortho-hotswap-solder-pcb.kicad_pcb

Cutiepie2040-ortho hotswap solder PCB layout, top view — open source RP2040/RP2350 board by flamwenco

About the Cutiepie2040-ortho hotswap solder PCB

Cutiepie2040-ortho hotswap solder is an open source RP2040/RP2350 PCB design by flamwenco, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 200 × 81 mm, with 112 components from 21 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and XC6206P332MR. By type, the board carries 38 diodes, 5 LEDs, 3 ICs, 2 connectors, 1 crystal and 1 switch.

From the project

A funky little 10.5u with dual 1.75u spacebars.

Main components on the Cutiepie2040-ortho hotswap solder

RP2040W25Q128JVSXC6206P332MR

Cutiepie2040-ortho hotswap solder bill of materials (BOM)

112 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
W25Q128JVS
U2
1
XC6206P332MR
XC6206PxxxMR
U3
1
12MHZ
12MHz
Y1
1
SM04B
J1
1
SWD
J2
4
1u
C_1V-Decoup1, C_3V-Decoup2, C_LD1, C_LD2
10
.1u
C_1V-Decoup2, C_1V-Decoup3, C_3V-Decoup3, C_3V-Decoup4, C_3V-Decoup5, C_3V-Decoup6, C_3V-Decoup7, C_3V-Decoup8 +2
1
10u
C_3V-Decoup1
2
22pF
C_Crystal1, C_Crystal2
1
Cutiepie Tab
H1
36
CPG151101S11-16
MX-NoLED
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +28
2
CPG151101S11-16
MX-NoLED
MX19, MX23
1
CPG151101S11-16
MX-NoLED
MX44
3
1k
R_Crystal1, R_Flash1, R_RST1
2
27
R_DATA1, R_DATA2
1
Reset
SW1
2
MX-NoLED
MX39, MX41
1
MX-NoLED
MX40
2
MX-NoLED
MX43, MX46
Show 1 more
QtyPartRefs
38
1N4148W
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +30

Cutiepie2040-ortho hotswap solder design files

The KiCad project lives in the flamwenco/cutiepie repository on GitHub; these links point at the commit this page was built from.

Cutiepie2040-ortho hotswap solder: common questions

What microcontroller does the Cutiepie2040-ortho hotswap solder use?

The Cutiepie2040-ortho hotswap solder is built around the RP2040, from the RP2040/RP2350 family.

How big is the Cutiepie2040-ortho hotswap solder PCB?

The Cutiepie2040-ortho hotswap solder measures 200 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cutiepie2040-ortho hotswap solder?

112 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cutiepie2040-ortho hotswap solder design files?

From the flamwenco/cutiepie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cutiepie2040-ortho hotswap solder design in my own project?

Yes, under the terms of its GPL-3.0 license, which flamwenco chose for the repository.

Can I test firmware for the Cutiepie2040-ortho hotswap solder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in cutiepie

Similar boards