2425 ESE Projet StealthKitty
flexdrt·2425_ESE_Projet_StealthKitty·hardware/StealthKitty.kicad_pro/StealthKitty.kicad_pro.kicad_pcb
About the 2425 ESE Projet StealthKitty PCB
2425 ESE Projet StealthKitty is an open source STM32 PCB design by flexdrt, published on GitHub. It is a 4-layer board measuring 54 × 57 mm, with 67 components from 40 distinct parts.
Its main chip is the STM32G431CBU6, from the STM32 family. Other key parts include the MP1475DJ-LF-P, ZXBM5210-SP and ADXL343. By type, the board carries 28 capacitors, 14 resistors, 6 connectors, 5 ICs, 4 diodes and 3 switches.
From the project
- 🐾 Un robot est désigné comme chat et doit attraper un autre robot, qui devient alors le nouveau chat.
- 🐾 Un robot est désigné comme chat et doit attraper un autre robot, qui devient alors le nouveau chat.
Ce projet est réalisé dans le cadre de la dernière année de la filière électronique et systèmes embarqués (ESE) de l'ENSEA.
Ce schéma ne détaille pas que chaque moteur a sa propre pwm et son driver propre également.
1. ⚡ Alimentation principale - La batterie NiMH 7.2V 1.3Ah alimente l'ensemble du système. Elle est connectée à des régulateurs de tension pour fournir les différentes tensions nécessaires aux composants : - MP1475S : Régulateur 5V pour alimenter les moteurs et certains…
Main components on the 2425 ESE Projet StealthKitty
2425 ESE Projet StealthKitty bill of materials (BOM)
67 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP1475DJ-LF-P | SOT65P280X100-8N | IC501 |
| 2 | ZXBM5210-SP | Diodes_SO-8EP | U1, U2 |
| 1 | ADXL343 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U301 |
| 1 | STM32G431CBU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U401 |
| 1 | Crystal_GND24_Small | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y401 |
| 4 | Conn_01x06 | JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal | J201, J202, J301, J302 |
| 1 | Conn_01x08 | JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J303 |
| 1 | Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J401 |
| 1 | Conn_01x02 | JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | Alim_charger501 |
| 1 | Battery_Cell | JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | BT501 |
| 1 | 0.1uF | C_0402_1005Metric | Cio301 |
| 1 | 1uF | C_0603_1608Metric | Cs301 |
| 1 | BU33SD5WG-TR | SOT95P280X125-5N | PS501 |
| 2 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW401, SW402 |
| 1 | WS-TOTV Ø 6.35mm Switch | JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | SW501 |
| 1 | LED_status_orange | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D401 |
| 1 | LED_purple | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D402 |
| 1 | LED_status_LiDAR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D403 |
| 1 | LED_ON | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D501 |
| 1 | 74438356047HT 4.7uH | INDPM5050X200N | L501 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 1uF | C_0603_1608Metric | C201, C202, C207, C208, C402, C504, C506 |
| 2 | 10uF | C_0603_1608Metric | C203, C206 |
| 2 | 100n | C_0402_1005Metric | C204, C205 |
| 5 | 100 nF | C_0402_1005Metric | C401, C403, C404, C405, C406 |
| 1 | 4.7 uF | C_0603_1608Metric | C407 |
| 1 | 10 nF | C_0402_1005Metric | C408 |
| 2 | 10 pF | C_0402_1005Metric | C409, C411 |
| 1 | 100nF | C_0402_1005Metric | C412 |
| 3 | 22uF | C_0805_2012Metric | C501, C507, C509 |
| 3 | 0.1uF | C_0402_1005Metric | C502, C503, C505 |
| 1 | 15pF | C_0402_1005Metric | C508 |
| 1 | 3.3k | R_0402_1005Metric | R401 |
| 1 | 2.2k | R_0402_1005Metric | R402 |
| 4 | 1k | R_0402_1005Metric | R403, R404, R405, R507 |
| 2 | 10k | R_0402_1005Metric | R406, R407 |
| 2 | 100k | R_0402_1005Metric | R501, R502 |
| 1 | 20 | R_0402_1005Metric | R503 |
| 1 | 16k | R_0402_1005Metric | R504 |
| 1 | 7.68k | R_0402_1005Metric | R505 |
| 1 | 40.2k | R_0402_1005Metric | R506 |
2425 ESE Projet StealthKitty design files
The KiCad project lives in the flexdrt/2425_ESE_Projet_StealthKitty repository on GitHub; these links point at the commit this page was built from.
2425 ESE Projet StealthKitty: common questions
What microcontroller does the 2425 ESE Projet StealthKitty use?
The 2425 ESE Projet StealthKitty is built around the STM32G431CBU6, from the STM32 family.
How big is the 2425 ESE Projet StealthKitty PCB?
The 2425 ESE Projet StealthKitty measures 54 × 57 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 2425 ESE Projet StealthKitty?
67 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2425 ESE Projet StealthKitty design files?
From the flexdrt/2425_ESE_Projet_StealthKitty repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2425 ESE Projet StealthKitty design in my own project?
The repository has no license, so all rights stay with flexdrt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2425 ESE Projet StealthKitty without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k