2 open source boards using the MP1475DJ-LF-P

Real designs built with the MP1475DJ-LF-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MP1475DJ-LF-P in open source designs

The gallery holds 2 open source boards using the MP1475DJ-LF-P from 2 GitHub repositories; a typical one measures about 55.5 × 55.5 mm and carries around 77 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Autonomous-Robot by IKRAMAFIF.

Parts used alongside the MP1475DJ-LF-P

Microcontrollers on boards using the MP1475DJ-LF-P

What boards using the MP1475DJ-LF-P are built for

MP1475DJ-LF-P: common questions

Where can I find a MP1475DJ-LF-P reference design?

Each of the 2 boards on this page is a real design using the MP1475DJ-LF-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MP1475DJ-LF-P use?

Most are built on STM32 (2).

How big is a typical board using the MP1475DJ-LF-P?

The median is 55.5 × 55.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the MP1475DJ-LF-P?

By GitHub stars, Autonomous-Robot by IKRAMAFIF, with 0 stars.

Can I simulate one of these boards using the MP1475DJ-LF-P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part