HardLabs

Val01

flisat·val01·kicad/Val01.kicad_pcb

Val01 PCB layout, top view — open source RP2040/RP2350 board by flisat

About the Val01 PCB

Val01 is an open source RP2040/RP2350 PCB design by flisat, published on GitHub. It is a 2-layer board measuring 105.3 × 50.8 mm, with 13 components from 6 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family.

From the project

8 RGB Leds - Logic Gate - Motor

Main components on the Val01

Pico

Val01 bill of materials (BOM)

13 components, 6 distinct parts.

QtyPartRefs
1
Pico
U1
1
R_Potentiometer_Trim_US
AnalogInPin1
1
Motor_DC
AnalogOutPin1
3
SW_Push
LogInPin1, LogInPin2, NeoPixelInPin1
6
10K
LogR1, LogR2, LogR3, LogR4, NeoPixelR1, NeoPixelR2
1
220
LogR5

Val01 design files

The KiCad project lives in the flisat/val01 repository on GitHub; these links point at the commit this page was built from.

Val01: common questions

What microcontroller does the Val01 use?

The Val01 is built around the Pico, from the RP2040/RP2350 family.

How big is the Val01 PCB?

The Val01 measures 105.3 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Val01?

13 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Val01 design files?

From the flisat/val01 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Val01 design in my own project?

The repository has no license, so all rights stay with flisat. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Val01 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards