G4 Test Arena National Instruments Connector
About the G4 Test Arena National Instruments Connector PCB
G4 Test Arena National Instruments Connector is an open source PCB design by floesche, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 260 × 60 mm, with 27 components from 12 distinct parts.
Other key parts include the 296-18593-1, DD5 and POLOLU_D24V6Fx. By type, the board carries 9 ICs, 8 connectors, 6 capacitors, 2 resistors, 1 transistor and 1 switch.
It belongs with the displays & leds and test & measurement designs in this gallery.
Main components on the G4 Test Arena National Instruments Connector
G4 Test Arena National Instruments Connector bill of materials (BOM)
27 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 296-18593-1 VAL** | SPARKFUN_TXB0104 | U1, U2, U3, U4, U5, U6 |
| 1 | DD5 VAL** | SPARKFUN_TXB0104 | U7 |
| 2 | POLOLU_D24V6Fx | D24V6Fx | U8, U9 |
| 1 | MOSFET_NCHAN | SOT-23-3 | Q2 |
| 1 | 732-5326 Barrel_Jack | DCJACK_2PIN_HIGHCURRENT | J1 |
| 6 | CONN15 | HEADER_TOP | P1, P2, P3, P4, P5, P6 |
| 1 | CONN_34X2 | TE_CONN_DSUB_RA_68 | P7 |
| 1 | SW_SPDT | slide_switch | SW1 |
| 3 | 399-3684-1 10uF | Capacitor_Polarized | C1, C2, C4 |
| 3 | 478-1395-2 10uF | Capacitor_Polarized | C3, C5, C6 |
| 1 | RMCF0805JT27R0 200 | R_0805_2012Metric | R1 |
| 1 | RMCF0805JT27R0 20k | R_0805_2012Metric | R2 |
G4 Test Arena National Instruments Connector design files
The KiCad project lives in the floesche/LED-Display_G4_Hardware_Arena repository on GitHub; these links point at the commit this page was built from.
G4 Test Arena National Instruments Connector: common questions
How big is the G4 Test Arena National Instruments Connector PCB?
The G4 Test Arena National Instruments Connector measures 260 × 60 mm, has 4 copper layers and is 0.19 mm thick.
How many components are on the G4 Test Arena National Instruments Connector?
27 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the G4 Test Arena National Instruments Connector design files?
From the floesche/LED-Display_G4_Hardware_Arena repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the G4 Test Arena National Instruments Connector design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which floesche chose for the repository.
More boards in LED-Display_G4_Hardware_Arena
Arena 12-12 v8 ni
228.6 × 228.6 mm575 parts6LCC-BY-4.00
NXPArena 12-12 Teensy Modular LED Display
228.6 × 228.6 mm441 parts6LCC-BY-4.00
Arena 12-12 v7 ni
228.6 × 228.6 mm120 parts6LCC-BY-4.00
NXP12-12 Teensy G4.1 Arena Modular LED Display
228.6 × 228.6 mm119 parts6LCC-BY-4.00
Arena 12-18 v0
330.2 × 238.5 mm99 parts2LCC-BY-4.00
Arena 12-18 s v0
330.2 × 238.5 mm88 parts2LCC-BY-4.00
Arena 12-12 Belt :: Modular LED Display
228.6 × 228.6 mm37 parts2LCC-BY-4.00
Arena 12-12 top :: Modular LED Display
228.6 × 228.6 mm37 parts2LCC-BY-4.00
Arena 6-inf v0p3
260 × 60 mm34 parts2LCC-BY-4.00
NXPG4 Test Arena Teensy 4.1
260 × 80 mm26 parts4LCC-BY-4.00
RP2040/RP2350G4 Test Arena Raspberry Pi Pico
260 × 80 mm24 parts4LCC-BY-4.00
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k