HardLabs

G4 Test Arena Teensy 4.1

floesche·LED-Display_G4_Hardware_Arena·arena_06-inf/arena_06-inf_teensy/arena_06-inf_teensy.kicad_pcb

G4 Test Arena Teensy 4.1 PCB layout, top view — open source NXP board by floesche

About the G4 Test Arena Teensy 4.1 PCB

G4 Test Arena Teensy 4.1 is an open source NXP PCB design by floesche, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 260 × 80 mm, with 26 components from 11 distinct parts.

Its main chip is the DD5, from the NXP family. Other key parts include the 296-18593-1. By type, the board carries 9 connectors, 7 ICs, 6 capacitors, 2 resistors, 1 transistor and 1 switch.

It belongs with the displays & leds designs in this gallery.

Main components on the G4 Test Arena Teensy 4.1

296-18593-1DD5

G4 Test Arena Teensy 4.1 bill of materials (BOM)

26 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
296-18593-1
SPARKFUN_TXB0104
U1, U2, U3, U4, U5, U6
1
DD5
Teensy4.1
U7
1
MOSFET_NCHAN
Q2
1
732-5326
Barrel_Jack
J1
2
732-5326
Conn_01x04_Pin
J2, J3
6
CONN15
P1, P2, P3, P4, P5, P6
1
SW_SPDT
SW1
3
399-3684-1
C_Polarized_Small
C1, C2, C4
3
478-1395-2
C_Polarized_Small
C3, C5, C6
1
RMCF0805JT27R0
200
R1
1
RMCF0805JT27R0
20k
R2

G4 Test Arena Teensy 4.1 design files

The KiCad project lives in the floesche/LED-Display_G4_Hardware_Arena repository on GitHub; these links point at the commit this page was built from.

G4 Test Arena Teensy 4.1: common questions

What microcontroller does the G4 Test Arena Teensy 4.1 use?

The G4 Test Arena Teensy 4.1 is built around the DD5, from the NXP family.

How big is the G4 Test Arena Teensy 4.1 PCB?

The G4 Test Arena Teensy 4.1 measures 260 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the G4 Test Arena Teensy 4.1?

26 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the G4 Test Arena Teensy 4.1 design files?

From the floesche/LED-Display_G4_Hardware_Arena repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the G4 Test Arena Teensy 4.1 design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which floesche chose for the repository.

Can I test firmware for the G4 Test Arena Teensy 4.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in LED-Display_G4_Hardware_Arena

Similar boards