Arena 6-inf v0p3
About the Arena 6-inf v0p3 PCB
Arena 6-inf v0p3 is an open source PCB design by floesche, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 260 × 60 mm, with 34 components from 13 distinct parts.
Other key parts include the 296-18593-1, DD5 and POLOLU_3V3. By type, the board carries 10 connectors, 8 ICs, 8 resistors, 6 modules, 1 transistor and 1 switch.
It belongs with the displays & leds designs in this gallery, and the repository also holds 2 earlier revisions of it.
Main components on the Arena 6-inf v0p3
Arena 6-inf v0p3 bill of materials (BOM)
34 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 296-18593-1 SPARKFUN_TXB0104 | SPARKFUN_TXB0104 | U1, U2, U3, U4, U5, U6 |
| 1 | DD5 SPARKFUN_TXB0104 | SPARKFUN_TXB0104 | U7 |
| 1 | POLOLU_3V3 | POLOLU_3V3 | U8 |
| 6 | 11902 VAL** | MOUNT_HOLE_4_40 | M1, M2, M3, M4, M5, M6 |
| 1 | SOT-23 MOSFET_NCHAN | SOT23 | Q1 |
| 6 | CONN15 | HEADER_TOP | P1, P2, P3, P4, P5, P6 |
| 2 | CONN_20X2 | PIN_ARRAY_SHRD_20X2 | P7, P10 |
| 1 | CONN_34X2 | TE_CONN_DSUB_RA_68 | P8 |
| 1 | CONN_2 | DCJACK_2PIN_HIGHCURRENT | P9 |
| 1 | SWITCH_INV | slide_switch | SW1 |
| 1 | RMCF0805JT27R0 200 | SM0805 | R1 |
| 1 | RMCF0805JT27R0 20k | SM0805 | R2 |
| 6 | RMCF0805JT27R0 R | R_SMALL | R3, R4, R5, R6, R7, R8 |
Arena 6-inf v0p3 design files
The KiCad project lives in the floesche/LED-Display_G4_Hardware_Arena repository on GitHub; these links point at the commit this page was built from.
Arena 6-inf v0p3: common questions
How big is the Arena 6-inf v0p3 PCB?
The Arena 6-inf v0p3 measures 260 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arena 6-inf v0p3?
34 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arena 6-inf v0p3 design files?
From the floesche/LED-Display_G4_Hardware_Arena repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arena 6-inf v0p3 design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which floesche chose for the repository.
More boards in LED-Display_G4_Hardware_Arena
Arena 12-12 v8 ni
228.6 × 228.6 mm575 parts6LCC-BY-4.00
NXPArena 12-12 Teensy Modular LED Display
228.6 × 228.6 mm441 parts6LCC-BY-4.00
Arena 12-12 v7 ni
228.6 × 228.6 mm120 parts6LCC-BY-4.00
NXP12-12 Teensy G4.1 Arena Modular LED Display
228.6 × 228.6 mm119 parts6LCC-BY-4.00
Arena 12-18 v0
330.2 × 238.5 mm99 parts2LCC-BY-4.00
Arena 12-18 s v0
330.2 × 238.5 mm88 parts2LCC-BY-4.00
Arena 12-12 Belt :: Modular LED Display
228.6 × 228.6 mm37 parts2LCC-BY-4.00
Arena 12-12 top :: Modular LED Display
228.6 × 228.6 mm37 parts2LCC-BY-4.00
G4 Test Arena National Instruments Connector
260 × 60 mm27 parts4LCC-BY-4.00
NXPG4 Test Arena Teensy 4.1
260 × 80 mm26 parts4LCC-BY-4.00
RP2040/RP2350G4 Test Arena Raspberry Pi Pico
260 × 80 mm24 parts4LCC-BY-4.00
Earlier revisions in the repo: arena_6-inf_v0p2, arena_6-inf_v0p1
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k