QFBMS
Focerqc·QFBMS
About the QFBMS PCB
QFBMS is an open source ESP32 PCB design by Focerqc, published on GitHub. It is a 2-layer board measuring 130 × 32 mm, with 149 components from 42 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the LTC7138 and ISO1050 (DUB-8). By type, the board carries 2 ICs, 2 transistors, 2 inductors, 1 buzzer and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
QFBMS 32-series battery-management PCB — KiCad design, references and local dashboards. Work in progress.
QFBMS is a 32-series, charge-only battery-management board for a Fungineers pack. It uses two BQ76952 monitors and an ESP32-C3-MINI-1. The intended software is the VBMS32-target VESC Express firmware plus the supplied VBMS32 Micro package.
The board monitors cells and temperature, measures charging current, controls charging, and balances cells. Discharge protection is outside the build scope.
Main components on the QFBMS
QFBMS bill of materials (BOM)
149 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC7138 | Analog_MSOP-12-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_ThermalVias | U4 |
| 1 | ISO1050 (DUB-8) | SMDIP-8_W9.53mm | U7 |
| 2 | AGM15T03LL Diodes Inc. | TOLL-8_AGM15T03LL | Q1, Q2 |
| 1 | FUET-5030 | Buzzer_5.0x5.0mm_SMD | BZ1 |
| 32 | 0.22uF | C_0402_1005Metric | C_F1, C_F2, C_F3, C_F4, C_F5, C_F6, C_F7, C_F8 +24 |
| 1 | 10uF_100V | C_1812_4532Metric | C_FLT1 |
| 1 | 100nF | C_0603_1608Metric | C_SSR1 |
| 1 | 1uF | C_0805_2012Metric | C_SSR2 |
| 1 | 100uF_16V | CP_EIA-6032-28_Kemet-C | C_TAN1 |
| 1 | Schottky | D_SOD-123 | D_BST1 |
| 3 | DSK320 | D_SOD-123F | D_CHG1, D_CHG2, D_CHG3 |
| 1 | PDZ16B | D_SOD-323 | D_GS1 |
| 6 | D_Schottky | D_SOD-123 | D_PRI1, D_PRI2, D_PRI3, D_SEC1, D_SEC2, D_SEC3 |
| 1 | TVS | D_SOD-123 | D_S1 |
| 1 | JT 15A | Fuse_2512_6332Metric | F1 |
| 1 | XT30PW-M (BAT) | XT30PW-M_Lugs | J_BAT1 |
| 1 | 0-8 | JST_GH_BM10B-GHS-TBT_1x10-1MP_P1.25mm_Vertical | J_CELL1 |
| 1 | 9-16 | JST_GH_BM09B-GHS-TBT_1x09-1MP_P1.25mm_Vertical | J_CELL2 |
| 1 | 17-24 | JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical | J_CELL3 |
| 1 | 25-32 | JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical | J_CELL4 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XT30PW-F (CHG) | XT30PW-F_Lugs | J_CHG1 |
| 1 | CAN/5V | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J_COMM1 |
| 1 | T1 | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J_T1 |
| 1 | T2 | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J_T2 |
| 1 | T3 | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J_T3 |
| 1 | T4 | JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J_T4 |
| 1 | USB-C | USB_C_Receptacle_16P | J_USB1 |
| 33 | 27R0 | R_0805_2012Metric | R_B1, R_B2, R_B3, R_B4, R_B5, R_B6, R_B7, R_B8 +25 |
| 1 | 100k | R_0603_1608Metric | R_CHG1 |
| 1 | 2203 | R_0805_2012Metric | R_CHG2 |
| 3 | 1000 | R_0805_2012Metric | R_DSG1, R_S1, R_S2 |
| 32 | 20R | R_0402_1005Metric | R_F1, R_F2, R_F3, R_F4, R_F5, R_F6, R_F7, R_F8 +24 |
| 3 | 01X | R_0603_1608Metric | R_G1, R_SEC1, R_SSR1 |
| 1 | 474 | R_0603_1608Metric | R_GS1 |
| 2 | R001 | R_2512_6332Metric | R_SH1, R_SH2 |
| 1 | 10k | R_0603_1608Metric | R_SSR2 |
| 1 | BQ7695202 (IC1) | TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias | U_BQ1 |
| 1 | BQ7695202 (IC2) | TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias | U_BQ2 |
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U_ESP1 |
| 1 | GSRELAY | H2440_SSR | U_SSR1 |
| 1 | Unmarked | R_0603_1608Metric | FB1 |
| 1 | 180uH_181 | L_7.3x7.3_H4.5 | L1 |
QFBMS design files
The KiCad project lives in the Focerqc/QFBMS repository on GitHub; these links point at the commit this page was built from.
QFBMS: common questions
What microcontroller does the QFBMS use?
The QFBMS is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the QFBMS PCB?
The QFBMS measures 130 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QFBMS?
149 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the QFBMS design files?
From the Focerqc/QFBMS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the QFBMS design in my own project?
The repository has no license, so all rights stay with Focerqc. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the QFBMS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k