Anoden Stabi
About the Anoden Stabi PCB
Anoden Stabi is an open source PCB design by FordPrfkt, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 24 components from 15 distinct parts.
By type, the board carries 9 resistors, 8 capacitors, 3 diodes, 2 transistors and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Tube Amplifier using KT88 Tubes based on BlackCat
Anoden Stabi bill of materials (BOM)
24 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BU508A | TO-3P-3_Vertical | Q1 |
| 1 | 2SA1943 | TO-3P-3_Vertical | Q2 |
| 1 | Conn_01x04 | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J1 |
| 1 | Conn_01x06 | Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical | J2 |
| 2 | BZT03-C150 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | BZT03-C120 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 2 | 10µF/450V | CP_Radial_D12.5mm_P5.00mm | C1, C6 |
| 3 | 47µF/400V | CP_Radial_D17.0mm_P7.50mm | C2, C4, C7 |
| 3 | 1µF/400V | C_Rect_L31.5mm_W11.0mm_P27.50mm_MKS4 | C3, C5, C8 |
| 1 | 82k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k/1W | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2 |
| 3 | 1k5 | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R3, R6, R7 |
| 2 | 30k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R9 |
| 1 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 10k | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R8 |
Anoden Stabi design files
The KiCad project lives in the FordPrfkt/KT88-Amp repository on GitHub; these links point at the commit this page was built from.
Anoden Stabi: common questions
How big is the Anoden Stabi PCB?
The Anoden Stabi measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Anoden Stabi?
24 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Anoden Stabi design files?
From the FordPrfkt/KT88-Amp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Anoden Stabi design in my own project?
The repository has no license, so all rights stay with FordPrfkt. Use it as a reference, and ask the author before reusing the design.
More boards in KT88-Amp
12V 6V3 Delay
160 × 100 mm111 parts2LNo license1
Endstufe
165 × 135 mm59 parts2LNo license1
400VAnoden
160 × 100 mm48 parts2LNo license1
Bias
80 × 50 mm36 parts2LNo license1
Protection
80 × 50 mm25 parts2LNo license1
Regler
205 × 50 mm22 parts2LNo license1
Aussteuerung
100 × 40 mm17 parts2LNo license1
Eingang
47.5 × 38.7 mm6 parts2LNo license1
6V3 AC Distribution
80 × 25 mm5 parts2LNo license1
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687