APPS-ETC Board
About the APPS-ETC Board
APPS-ETC Board is an open source PCB design by formulaslug, published on GitHub. It is a 2-layer board measuring 93.5 × 69.6 mm, with 26 components from 15 distinct parts.
Other key parts include the NUCLEO-L432KC, MCP6004, LM7805_TO220 and LM7809_TO220. By type, the board carries 11 resistors, 9 capacitors, 4 ICs and 1 connector.
From the project
Electrical design repository for the FS-2 racecar
1) First, download KiCAD for your specific OS
2) Next, make sure you have Git installed.
GitHub Desktop If you are not tech savvy Git If you are tech savvy 😎
If you installed GitHub desktop, create an account and close the repository. I recommend cloning the repository into your documents folder.
How to clone repositories on GitHub desktop
The repository url is: https://github.com/formulaslug/fs-2-schematics
Main components on the APPS-ETC Board
APPS-ETC Board bill of materials (BOM)
26 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-L432KC | MODULE_NUCLEO-L432KC | U1 |
| 1 | MCP6004 | PDIP14_300MC_MCH | U2 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U6 |
| 1 | LM7809_TO220 | TO-220-3_Vertical | U8 |
| 1 | DTM1312PC12PDR008 | TE_DTM1312PC12PDR008 | P1 |
| 1 | ISO1050DUB | SOP-8_6.62x9.15mm_P2.54mm | CAN_Tranceiver1 |
| 1 | 0.33 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | 0.33uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 3 | 40 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9 |
| 4 | 180kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R7 |
| 2 | 330kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R8 |
| 1 | 120 O | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 4 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9, R10, R11 |
APPS-ETC Board design files
The KiCad project lives in the formulaslug/fs-2-schematics repository on GitHub; these links point at the commit this page was built from.
- LayoutAPPS_ETCA/APPS_ETC.kicad_pcb
- SchematicAPPS_ETCA/APPS_ETC.kicad_sch
APPS-ETC Board: common questions
How big is the APPS-ETC Board?
The APPS-ETC Board measures 93.5 × 69.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the APPS-ETC Board?
26 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the APPS-ETC Board design files?
From the formulaslug/fs-2-schematics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the APPS-ETC Board design in my own project?
The repository has no license, so all rights stay with formulaslug. Use it as a reference, and ask the author before reusing the design.
More boards in fs-2-schematics
BSPD +
160 × 124.7 mm137 parts2LNo license2
Accumulator Board
139.7 × 88.9 mm105 parts2LNo license2
TSAL(1)
68.6 × 68.6 mm97 parts2LNo license2
FS-2 Battery Management System Bank Board
59.4 × 76.8 mm92 parts2LNo license2
FS-2-Brakelight
103.6 × 28.3 mm46 parts2LNo license2
Brakelight2
103.6 × 28.3 mm41 parts2LNo license2
Charging Shutdown Circuit
139.7 × 88.9 mm37 parts2LNo license2
Telemetry Board
76.2 × 55.4 mm18 parts2LNo license2
Charging Shutdown for
177.8 × 127 mm17 parts2LNo license2
Tractive
90.2 × 64.8 mm16 parts2LNo license2
Precharge
63.5 × 53.3 mm8 parts2LNo license2