21 open source boards using the NUCLEO-L432KC
Real designs built with the NUCLEO-L432KC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Accumulator Board
formulaslug
127 × 91.5 mm102 parts2LNo license5BSPD +
formulaslug
160 × 124.7 mm137 parts2LNo license2WAFEL-Evaluation-Board
LVladymyr
202.7 × 66 mm214 parts2LCERN-OHL-S-2.00IEM-Electronics
arihant-o
108 × 109.6 mm111 parts4LNo license0Array-Blackbody-A
lhr-solar
80 × 100 mm103 parts2LNo license0Slice FPSG
feastorg
100.1 × 100 mm100 parts4LGPL-3.00Actionneur-CdR-2025
AREM-Projets
78 × 60 mm12 parts2LNo license0Slice TEMP NUCL S4L-r1
feastorg
70 × 100 mm10 parts4LGPL-3.00Slice TEMP NUCL L4L-r1
feastorg
100.1 × 144.9 mm10 parts4LGPL-3.00Accumulator Board
formulaslug
139.7 × 88.9 mm105 parts2LNo license2AVR/Arduino
ORCA Control Board
LukeDWaller99
99.1 × 99.1 mm64 parts2LNo license1TestBoard TPS27SA08-Q1
lhr-solar
59.8 × 92 mm112 parts2LNo license0AVR/Arduino
ORCA Control Board
LukeDWaller99
99.1 × 99.1 mm64 parts2LNo license0SimpleMotor
UWRoverTeam
38.4 × 63 mm17 parts2LNo license0UT SVT MPPT 2018
corbosiny
172.7 × 116.8 mm97 parts2LNo license3PayloadDorji
coffee-and-telesense
85.9 × 85.9 mm48 parts2LNo license2Regul Temp L432KC
IOGS-LEnsE-platforms
88.9 × 70.1 mm28 parts2LNo license0APPS-ETC Board
formulaslug
93.5 × 69.6 mm26 parts2LNo license2FIR filter G431KB
IOGS-LEnsE-platforms
88.9 × 59.7 mm17 parts2LNo license0Charger Board
formulaslug
71.1 × 76.2 mm26 parts2LNo license5Telemetry Board
formulaslug
76.2 × 55.4 mm18 parts2LNo license2
How designs wire the NUCLEO-L432KC
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the NUCLEO-L432KC connects to, and the resistors, capacitors and other passives placed on it.
- The AREF pins is left unconnected on 16 of 16 designs.
- The NRST_CN4 pin is left unconnected on 11 of 11 designs.
- The +5V pins is tied to 5V on 10 of 16 designs (not connected on 6).
- The VIN pins is left unconnected on 10 of 16 designs (9V on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D1/TXpin 1 | Connected to: Not connected 60% · a signal 40% |
|
| D0/RXpin 2 | Connected to: Not connected 60% · a signal 40% |
|
| RESETpin 3, 28 | Connected to: Signal 60% · not connected 40% |
|
| GNDpin 4, 29 | Connected to: GND 90% | — |
| D2pin 5 | Connected to: ADM3055E 40%, a connector 40% |
|
| D3pin 6 | Connected to: Signal 100% |
|
| D5pin 8 | Connected to: A connector 40% |
|
| D6pin 9 | Connected to: Signal 100% |
|
| D7pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| D8pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| D10pin 13 | Connected to: ADM3055E 40%, a connector 40% |
|
| 3V3pin 17 | Connected to: 3.3V 80% · GND 20% | — |
| AREFpin 18, CN4_13 | Connected to: Not connected 100% | — |
| A0pin 19 | Connected to: Signal 60% · not connected 20% · 5V 20% |
|
| A1pin 20 | Connected to: Signal 80% · not connected 20% |
|
| A2pin 21 | Connected to: Signal 80% · not connected 20% |
|
| A3pin 22 | Connected to: Signal 100% |
|
| A4pin 23 | Connected to: Signal 100% |
|
| A5pin 24 | Connected to: Signal 60% · not connected 40% |
|
| A6pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| A7pin 26 | Connected to: Not connected 80% · a signal 20% | — |
| +5Vpin 27, CN4_4 | Connected to: 5V 63% · not connected 38% | — |
| VINpin 30, CN4_1 | Connected to: Not connected 63% · 9V 38% | — |
| NRST_CN3pin CN3_3 | Connected to: Not connected 82% · a signal 18% | — |
| GND_CN3pin CN3_4 | Connected to: GND 91% | — |
| PB1pin CN3_9 | Connected to: Not connected 64% · a signal 36% | — |
| PC14pin CN3_10 | Connected to: Not connected 91% | — |
| PC15pin CN3_11 | Connected to: Not connected 91% | — |
| GND_CN4pin CN4_2 | Connected to: GND 91% | — |
| NRST_CN4pin CN4_3 | Connected to: Not connected 100% | — |
| PA0pin CN4_12 | Connected to: Signal 55% · not connected 45% |
|
| +3V3pin CN4_14 | Connected to: 3.3V 64% · not connected 18% · a signal 18% | — |
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Accumulator Board by formulaslug, UT SVT MPPT 2018 by corbosiny, PayloadDorji by coffee-and-telesense and Accumulator Board by formulaslug.
The NUCLEO-L432KC in open source designs
The gallery holds 21 open source boards using the NUCLEO-L432KC from 16 GitHub repositories; a typical one measures about 93.5 × 91.5 mm and carries around 64 components.
81% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is Accumulator Board by formulaslug.
Parts used alongside the NUCLEO-L432KC
Microcontrollers on boards using the NUCLEO-L432KC
What boards using the NUCLEO-L432KC are built for
NUCLEO-L432KC: common questions
Where can I find a NUCLEO-L432KC reference design?
Each of the 21 boards on this page is a real design using the NUCLEO-L432KC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NUCLEO-L432KC AREF pin connected?
The AREF pins is left unconnected on 16 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the NUCLEO-L432KC.
How is the NUCLEO-L432KC NRST_CN4 pin connected?
The NRST_CN4 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 16 open source designs using the NUCLEO-L432KC.
How is the NUCLEO-L432KC +5V pin connected?
The +5V pins is tied to 5V on 10 of 16 designs (not connected on 6). Counted from the KiCad layouts of 16 open source designs using the NUCLEO-L432KC.
What parts are used alongside the NUCLEO-L432KC?
The AP63205, ADM3055E, C7950, CDSOT23-T24CAN and HEF4093B appear in the most repositories here.
Which microcontrollers do boards using the NUCLEO-L432KC use?
Most are built on AVR/Arduino (2).
How big is a typical board using the NUCLEO-L432KC?
The median is 93.5 × 91.5 mm, and 81% are two-layer designs.
What is the most popular open source board using the NUCLEO-L432KC?
By GitHub stars, Accumulator Board by formulaslug, with 5 stars.
Can I simulate one of these boards using the NUCLEO-L432KC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.