Programmer
About the Programmer PCB
Programmer is an open source PCB design by FrankBuss, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 100 mm, with 97 components from 34 distinct parts.
Other key parts include the C88419, C485147, C39843328, C7843 and C7128. By type, the board carries 41 capacitors, 24 resistors, 15 ICs, 5 connectors, 5 inductors and 2 speakers.
It belongs with the usb & debug tools designs in this gallery.
Main components on the Programmer
Programmer bill of materials (BOM)
97 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C88419 MIC5504-3.3YM5 | SOT-23-5 | U1 |
| 1 | C485147 ~ TI(德州仪器) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U2 |
| 1 | C39843328 ~ Raspberry Pi(树莓派) | QFN-80_L10.0-W10.0-P0.40-TL-EP3.4 | U3 |
| 1 | C7843 SN74LVC1T45DBV | SOT-23-6 | U4 |
| 2 | C7128 74ALVC164245 | TSSOP-48_6.1x12.5mm_P0.5mm | U5, U6 |
| 1 | C181753 TLV320AIC3104IRHBR | QFN50P500X500X100-33N | U7 |
| 1 | C6185 AMS1117-1.8 | SOT-223-3_TabPin2 | U8 |
| 1 | C485077 SN74LVC138APWR | TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 4 | C97522 W25Q256JVEIQ | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U10, U11, U12, U13 |
| 2 | C27396 TPA2005D1DGNR | SOP65P490X110-9N | U14, U15 |
| 1 | SiT1602AI-22-33E-12.000000 | Oscillator_SMD_SiTime_SiT1602-4Pin_3.2x2.5mm | Y1 |
| 1 | WingTAT ED36BGFBK vectrex-edge-connector | vectrex | CON1 |
| 3 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4 |
| 1 | C5184243 USB4105-GF-A-120 | GCT_USB4105-GF-A-120 | J5 |
| 2 | Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1, LS2 |
| 2 | C455114 ~ XUNPU(讯普) | KEY-SMD_4P-L6.0-W6.0-P4.50-LS9.0 | SW1, SW2 |
| 2 | C84256 LED | LED_0805_2012Metric | D1, D2 |
| 5 | C97853 BLM18PG471SN1D | L_0603_1608Metric | L1, L2, L3, L4, L5 |
| 3 | C28323 1u | C_0805_2012Metric | C1, C2, C8 |
| 17 | C14663 100n | C_0603_1608Metric | C3, C11, C12, C13, C14, C15, C16, C19 +9 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C15850 10u | C_0805_2012Metric | C4 |
| 4 | C49678 100n | C_0805_2012Metric | C5, C6, C9, C10 |
| 6 | C15849 1u | C_0603_1608Metric | C7, C17, C18, C20, C21, C25 |
| 2 | C380317 10u | C_0603_1608Metric | C23, C35 |
| 4 | C513577 470n | C_0603_1608Metric | C31, C32, C33, C34 |
| 4 | C1588 1n | C_0603_1608Metric | C38, C39, C40, C41 |
| 3 | C25804 10k | R_0603_1608Metric | R1, R13, R25 |
| 1 | C23345 22 | R_0603_1608Metric | R3 |
| 8 | C25190 27 | R_0603_1608Metric | R4, R5, R14, R15, R16, R17, R18, R19 |
| 3 | C21190 1k | R_0603_1608Metric | R6, R7, R9 |
| 2 | C23186 5k1 | R_0603_1608Metric | R8, R12 |
| 2 | C22978 3k3 | R_0603_1608Metric | R10, R11 |
| 1 | C25803 100k | R_0603_1608Metric | R20 |
| 4 | C22807 150k | R_0603_1608Metric | R21, R22, R23, R24 |
Programmer design files
The KiCad project lives in the FrankBuss/bloxorz repository on GitHub; these links point at the commit this page was built from.
Programmer: common questions
How big is the Programmer PCB?
The Programmer measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Programmer?
97 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Programmer design files?
From the FrankBuss/bloxorz repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Programmer design in my own project?
Yes, under the terms of its MIT license, which FrankBuss chose for the repository.
More boards in bloxorz
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703
XG Station Power
54.3 × 91 mm9 parts2LCC-BY-4.0703
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389
Adapter tsop48 solder
48 × 33 mm3 parts2LGPL-3.0389
Adapter soic8 solder
48 × 20 mm3 parts2LGPL-3.0389