Prost
frederickk·prost·board/prost-pcb.kicad_pcb
About the Prost PCB
Prost is an open source PCB design by frederickk, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 33.2 mm, with 11 components from 9 distinct parts.
By type, the board carries 2 connectors, 2 diodes, 2 resistors and 1 switch.
It belongs with the audio designs in this gallery.
From the project
Brings 2 Midi host devices to the table of data sharing. Intermediary device to allow Midi host to Midi host communication.
Here's a brief demo video with Ableton Live, an Organelle, and Norns/Fates.
Prost! requires 2 dependencies to build and upload.
- Install PlatformIO this is required to build and flash the Arduinos. You can either install the CLI or the IDE. - USBMIDI is required for transmitting Midi data over USB, fortunately PlatformIO makes dependency bundling easy.
Before building and flashing be sure to install dependencies.

Prost bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIDI-DIN-5 | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J1 |
| 1 | MONO 3.5mm AUDIO JACK | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2 |
| 1 | DRILL1 | DRILL1 | |
| 1 | DRILL2 | DRILL2 | |
| 1 | DRILL3 | DRILL3 | |
| 1 | DRILL4 | DRILL4 | |
| 1 | MOMENTARY_SWITCH_SPST | MINI_PUSHBUTTON_SWITCH | S1 |
| 2 | LED_CRGB | LED_5MM_RGB | D1, D2 |
| 2 | 220 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
Prost design files
The KiCad project lives in the frederickk/prost repository on GitHub; these links point at the commit this page was built from.
Prost: common questions
How big is the Prost PCB?
The Prost measures 30 × 33.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Prost?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Prost design files?
From the frederickk/prost repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Prost design in my own project?
Yes, under the terms of its MIT license, which frederickk chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687