EtherDue
About the EtherDue PCB
EtherDue is an open source AVR/Arduino PCB design by freetronics, published on GitHub. It is a board measuring 101.6 × 53.3 mm, with 153 components from 66 distinct parts.
Its main chip is the ATMEGA16U2, from the AVR/Arduino family. Other key parts include the ATSAM3X8E, W5100, FDN340P, LMV358IPWR and POWERJACK. By type, the board carries 54 capacitors, 32 resistors, 16 diodes, 14 ICs, 8 inductors and 4 crystals.
From the project
Arduino Due compatible board with built-in Ethernet
The EtherDue is an 100% Arduino Due compatible board with onboard Ethernet.
For full details about the EtherDue, including a getting started guide, please visit the Freetronics EtherDue product page.
Design files were produced with Kicad. A PDF of the schematic is available.
Main components on the EtherDue
EtherDue bill of materials (BOM)
153 components, 66 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAM3X8E | TQFP144 | IC201 |
| 1 | ATMEGA16U2 | QFN32 | IC301 |
| 1 | W5100 | SQFP80 | IC601 |
| 3 | FDN340P | SOT23_MOSFET | U202, U503, U504 |
| 1 | LMV358IPWR | TSSOP8 | U203 |
| 1 | POWERJACK | POWER_JACK_PTH | U501 |
| 1 | LM2734Y | SOT23-6 | U502 |
| 1 | NCP1117ST33T3G | SOT223 | U505 |
| 1 | HY931147C | HY931147C | U602 |
| 1 | APX811-31UG-7 | SOT143-R | U603 |
| 1 | MICROSD | MICRO-SD-SOCKET-PP | U701 |
| 1 | 24AA025E48 | SOT23-6 | U702 |
| 1 | BC847BSMD | SOT23_TRANSISTOR | Q501 |
| 1 | 2N7002 | SOT23 | Q601 |
| 1 | TXC 7A 12MHz 18pF | TXC_7A | X201 |
| 1 | ABS07L 32.768kHz | ABS07L | X202 |
| 1 | TXC 7A 16MHz 18pF | TXC_7A | X301 |
| 1 | TXC 7A 25MHz 18pF | TXC_7A | X601 |
| 2 | USB_5PIN_SHELL | USB-MICRO_TH_4PEGS | P301, P401 |
| 1 | M04 | PIN_ARRAY_4x1 | DEBUG401 |
Show 46 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 500mA PTC 1812 | SM1812 | F301, F401 |
| 1 | M02X03 | pin_array_3x2 | ICSP301 |
| 1 | JTAG | 2X5_127MMPITCH | JP401 |
| 1 | M04 | FT-POE-MODULE-NOOUTLINE | JP601 |
| 1 | ARDUINO_DUE_SHIELD | ARDUINO_DUE_SHIELD | SHIELD401 |
| 3 | OPEN | SJ_OPEN | SJ201, SJ203, SJ601 |
| 2 | CLOSED | SJ_SHORTED | SJ202, SJ401 |
| 2 | SJ | SJ_SHORTED | SJ701, SJ702 |
| 1 | ERASE | TACTILE_SWITCH_SMD_2PIN_TINY | SW201 |
| 1 | RESET | TACTILE_SWITCH_SMD_2PIN_TINY | SW202 |
| 5 | PGB1010603 | 0603 | VR401, VR402, VR403, Z301, Z302 |
| 8 | YELLOW | LED-0603 | D201, D202, D204, D302, D303, D601, D605, D606 |
| 3 | GREEN | LED-0603 | D203, D602, D603 |
| 1 | CD1206-S | 1206_DIODE | D301 |
| 1 | 1N4004 | SMB-DIODE | D501 |
| 1 | CD1206-S01575 | 1206_DIODE | D502 |
| 1 | SK34A-LTP | SMA-DIODE | D503 |
| 1 | RED | LED-0603 | D604 |
| 5 | MH2029-300Y | MH2029 | L201, L501, L503, L504, L505 |
| 1 | 10uH SRR0604-100ML | SRR0604 | L502 |
| 2 | 1uH 250mA | 0805 | L601, L602 |
| 7 | 22pF | SM0402 | C201, C202, C205, C303, C304, C601, C602 |
| 2 | 22pF_NM | SM0402 | C203, C204 |
| 28 | 100nF | SM0402 | C206, C207, C208, C301, C302, C503, C504, C509 +20 |
| 1 | 1uF | SM0402 | C305 |
| 2 | 10nF | SM0402 | C401, C505 |
| 8 | 10uF | SM0603_Capa | C402, C403, C506, C507, C517, C518, C519, C528 |
| 1 | 47uF 25V | c_elec_5x5.3 | C501 |
| 1 | 10uF 25V | SM1206 | C502 |
| 1 | 100uF 16V | c_elec_5x5.3 | C510 |
| 3 | 10uF 6.3V A TANT | SM1206POL | C604, C606, C608 |
| 1 | 6k8 1% | SM0402_r | R201 |
| 2 | 39R 1% | SM0402_r | R202, R203 |
| 1 | 100K | SM0402_r | R204 |
| 3 | 1K5 | SM0402_r | R205, R207, R304 |
| 3 | 1K | RES_CAY16 | R206, R601, R604 |
| 1 | 10K | SMD-0402_r | R208 |
| 2 | 22R | SM0402_r | R301, R302 |
| 5 | 10K | SM0402_r | R303, R310, R403, R503, R505 |
| 1 | 2K7 | SM0402_r | R305 |
| 7 | 1K | SM0402_r | R306, R307, R308, R309, R501, R606, R607 |
| 2 | 100K | RES_CAY16 | R401, R502 |
| 1 | 52K3 | SM0402_r | R504 |
| 1 | 1M | SM0402_r | R602 |
| 1 | 12K3 1% | SM0402_r | R603 |
| 1 | 49R9 1% | RES_CAY16 | R605 |
EtherDue design files
The KiCad project lives in the freetronics/EtherDue repository on GitHub; these links point at the commit this page was built from.
- LayoutEtherDue.kicad_pcb
EtherDue: common questions
What microcontroller does the EtherDue use?
The EtherDue is built around the ATMEGA16U2, from the AVR/Arduino family.
How big is the EtherDue PCB?
The EtherDue measures 101.6 × 53.3 mm and is 1.6002 mm thick.
How many components are on the EtherDue?
153 components, from 66 distinct parts. The full bill of materials is listed on this page.
Where can I download the EtherDue design files?
From the freetronics/EtherDue repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EtherDue design in my own project?
The repository has no license, so all rights stay with freetronics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EtherDue without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746